® H123D X4 JET 《H123D User Manual》 Version 1.
DIFFERENT WAYS TO FLY, 2 CONFIGURATIONS The First Flight Configuration:Aircraft + HT012D Transmitter + The Second Flight Configuration: Aircraft + HT011 Transmitter + 01
I MPO RT ANT SAFETY I N F ORM A T ION OPERATION Be extremely careful and responsible when using the quad.Small electronic components can be damaged due to crashes or exposure to moisture/liquid. To avoid any injuries, do not use the quad with broken or damaged components. MAINTENANCE Do not try to open or repair the units by yourself. Please contact Hubsan or Hubsan authorized dealers for service. For more information, please visit the official website at www.hubsan.com.
Hubsan Safety Advisory Notice for Lithium-Polymer (LiPo) Batteries LiPo batteries are different from conventional batteries in that their chemical contents are encased in a relatively lightweight foil packaging. This has the advantage of significantly reducing their weight but it does mak e them more suscepti bl e to damage if roughly or inappropriate ly handled.
12. Do not connect the battery to a car charger/cigarette lighter or any kind of unconventional power source. 13. This battery is prohibited for non-designated devices. 14. Do not touch any kind of liquid waste or byproduct from batteries. If skin or clothes come in contact with these substances, please flush with water! 15. Do not mix other types of batteries with lithium batteries. 16. Do not exceed the specified charging time. 17. Do not place the battery in a microwave or in areas of high pressure. 18.
Table Of Contents Important Safety Information 02 3.4 Horizontal Calibration 16 1. The H123D Aircraft 06 3.5 Takeoff/Landing 16 1.1 Aircraft Component Breakdown 06 3.6 Basic Flight Operation 17 3.7 Acrobatics 19 3.8 Motor Stall Protection 21 3.9 Low Power Protection 21 1.2 Charging And Installing The Aircraft Battery 06 1.3 Installing And Removing The Propellers 07 3.10 Loss Of Flight Control 1.4 Aircraft LED Indications 08 Protection 08 H123D Frequently Asked Questions 21 1.
1 T he H1 2 3 D A i r c r a f t 1.1 Getting To Know Your H123D SD card slot 5.8G Antenna LiPo Battery Battery Strap Canopy Aircraft Status LED Propeller A Motor Motor Bracket 720P Camera Head Propeller B Headlight 1.2 Charging And Installing The Aircraft Battery The H123D aircraft is paired with a rechargeable 7.6v, 980mAh Li-Po. Be sure to use the provided Hubsan dedicated charger for charging. Fully charge the battery before flight.
● Make sure the battery is fully charged before each flight. ● Please do not leave unattended while charging. ● When charging is complete, disconnect the charger and battery from power immediately. 1.3 Installing And Removing Propellers The aircraft propellers are triple bladed; each is marked with either an A or a B. Please replace damaged propellers with genuine Hubsan stock. Before installing the propellers for the first time, please check whether the propeller and motor arm read "A" or "B”.
1.4 Aircraft LED Indicators LED Status Headlight (White) Function And/Or Aircraft Status During normal flight, the headlight is a solid white. Users may also opt to turn the headlight off. Power On All 4 LEDs flash simultaneously When the aircraft is not connected to a Flight Control transmitter or has been disconnected from a transmitter, the right rear LED will flash slowly. Connection Rear LEDs (Both Red) Upon connection with a transmitter, the right rear LED will become solidly lit.
2 T r ansm i t t e r s 2.1 The HT012D Transmitter 2.1.1 HT012D Key Functions Mode 1 (Japanese Hand) 5.8G Antenna 2.4 Antenna Screen Manual Mode Sport Mode Acro Mode No Function Micro USB Port Video Throttle/Aileron Joystick Throttle Trim Turn Headlight ON/OFF (Long Press) Normal Mode Expert Mode 3.5mm Video Port No Function Photo Power Elevator/Rudder Joystick Elevator Trim Rudder Trim Aileron Trim LED Indicator Mode 2 (American Hand) 5.8G Antenna 2.
2.1.2 HT012D Key Functions No. Key/Button/Switch Function (1) Push the stick forward or backward and the quadcopter will ascend Throttle or descend (respectively). Push the stick left or right and the /Aileron Joystick quadcopter will fly left or right (respectively). (2) Push the stick forward or backward and the quadcopter will fly Elevator forwards or backwards (respectively).
2.1.3 Transmitter Battery Installation Slide open the battery compartment. Install 4 AA batteries Slide the battery door back (be sure to match polarities correctly). onto the compartment. ● Do not mix new and old batteries. ● Do not cross-use different types of batteries at the same time. ● Do not charge non-rechargeable batteries. 2.2 The HT011 Transmitter 2.2.
2.4 Antenna Manual Mode Sport Mode Acro Mode Normal Mode Expert Mode Joystick Clear Screen (when paired with the HS001) Joystick Binding Button LED ON/OFF Battery Indicator LEDs Power 2.4G Status LED When this transmitter is paired with the H123D, some of the keys and buttons will have no functions.
2.2.2 HT011 Function Breakdown No. Key/Button/Switch Function (1) Throttle /Rudder Stick Push the stick forward or backward and the quadcopter will ascend or descend (respectively). Push the stick left or right and the quadcopter will rotate counterclockwise or clockwise (respectively). (2) Elevator /Aileron Stick Push the stick forward or backward and the quadcopter will fly forwards or backwards (respectively). Push the stick left or right and the quadcopter will fly left or right (respectively).
2.2.3 Battery Installation It is recommended that users implement some kind of flight training (i.e using a simulator for flight practice, seeking professional guidance, etc.) before flying. Please select an appropriate environment for flight. 3 G e t t in g R e a dy To F l y 3.1 Flight Environment Requirements (1) Select an open environment devoid of high rise buildings and tall obstructions (such as trees and poles). (2) Do not fly in bad weather conditions (such as in wind, rain or fog).
3.2 Pre-Flight Checklist (1) Make sure the aircraft battery and mobile device are charged and have adequate power. (2) Confirm that propellers and screws are properly installed. (3) If you are taking pictures, insert the Micro-SD card required for taking pictures and videos. (4) Verify that the motors arm and spin smoothly. (5) Ensure the camera lens is clean. 3.3 Binding 3.3.1 Binding The HT012D And Aircraft (1) Pull and hold the throttle to its lowest position.
For both configurations, flight operation is mostly the same. This manual will describe operation on the HT012D remote as an example. 3.4 Horizontal Calibration Horizontal calibration is required when the aircraft drifts on the horizontal plane during flight. When this happens, land the aircraft and disarm its motors. Follow the below steps to do a horizontal/gyro calibration. 1. Place the aircraft on a completely flat surface and then follow the below calibration procedure.
Landing Slowly and gently pull the throttle joystick down until the copter has completed its descent on the ground. Simultaneously pull the transmitter joysticks diagonally down-out to disarm the motors (as shown in the right figure). After all motors have come to a complete stop, release the joysticks. Land Disarm Motors 3.6 Basic Flight Operation Note: When flying the aircraft, be sure to slowly and firmly manage the controls.
(2) The rudder is used to control the aircraft’s rotations. Counterclockwise Rotation Mode 2 (American Hand) Clockwise Rotation Mode 1 (Japanese Hand) （3）The elevator controls the aircraft’s forward and backward movement. Forward Mode 2 (American Hand) Mode 1 (Japanese Hand) Backward （4）The aileron controls the aircraft’s left and right movement.
3.7 Acrobatics The H123D is capable of 360° rollovers and flips; you may use this capability by following the below steps. To better perform flips and rolls, please ensure that the aircraft is at a safe height from the ground. It is best to roll and flip the aircraft while it is ascending, so that it more easily maintains its height after flipping or rolling. Make sure that the transmitter is set to Acro Mode before attempting acrobatics. (1) Left Roll Steady the throttle and push the aileron stick right.
(3) Front Flip Steady the throttle and push the elevator stick forward. The aircraft will perform a forward flip. When the flip is complete, please center the elevator joystick and adjust the aircraft's position accordingly. Mode 2 (American Hand) Mode 1 (Japanese Hand) (4) Back Flip Steady the throttle and pull the elevator stick backward. The aircraft will perform a back flip. When the flip is complete, please center the elevator joystick and adjust the aircraft's position accordingly.
3.8 Motor Stall Protection When aircraft crashes or its propellers encounter blockage/obstruction, the motors will automatically disarm to prevent further damage. 3.9 Low Power Protection When the aircraft battery is low, the aircraft will beep and its rear LEDs will flash. When the aircraft battery has reached its maximum flight limit, the aircraft will slowly descend. 3.
4. Cannot take videos or pictures (1) Check to see that the SD card is installed in the aircraft prior to power on. (2) Make sure the SD card is formatted correctly.
Notice: Please read the operating instructions carefully before use! ● Never leave units unattended when charging ● Unplug the charging cable immediately after charging ● Propellers may cause injury ● This product is not a toy ● Not suitable for children under 14 years of age W W W . H U BSAN . C O M Product name: X4 Jet Vendor: Shenzhen Hubsan Technology Co.
