User's Guide

Before your Hublet arrives 1/2
1. Hublet Docking station is connected to the internet with cable or with a wireless connection. If you want to use cable, tell this to the Hublet team so that
your docking station will arrive with a pre-installed cable.
2. Make sure you have a WIFI network set up for the Hublet tablets and docking station if the connection is wireless. Hublet supports Open, WPA, WPA2 and
WEP networks. Different kinds of enterprise networks (WPA-EAP etc.) and networks with captive portals can be problematic due to the authentication
process. Some of these can be resolved with MAC address whitelisting. Please, contact Hublet for further information.
3. Provide Hublet with your network information beforehand. This way your tablets
will arrive pre-configured and all you need to do is scan a QR code provided by us with the tablets.
4. Hublet can be integrated to different systems via APIs. With library systems we have used SIP2, REST API and
WebServices interfaces depending on the system. Make sure that we have the necessary documentation on the
desired interface to configure your Hublet. With other systems, please contact Hublet directly. Integration may be time consuming and should always be
discussed in advance.
• Below is list of SIP2 parameters which are needed:
SIP2 Server Address
- server address: <IP address or Hostname, e.g. 10.1.2.3>
- server port: <TCP port number>
SIP2 Server Settings (mandatory)
- sip2_login_id: <User Id that Hublet will use to connect/Login to SIP2 server>
- sip2_login_password: <Password for sip2_login_id>
SIP2 Server settings (optional)
- sip2_login_location_code: <Location Info for SC (SelfService Check system == Hublet) is located)
SIP2 Parameters: (optional)
- sip2_institution_id (defaults to empty "")
- sip2_terminal_password (defaults to "")
513/03/2019