User's Guide

6. You are now on the Smartdock Maintenance screen. Press Network Settings and then Modify.

7. First select the Network Mode. To connect the dock to a WiFi network, choose Wireless and press forward.

8. *If you are using an ethernet cable, connect it to the back of the dock, choose Wired > Dynamic.

Then skip to step 12.

9. Next, select the IP Address Mode Dynamic, move forward.

10. Select the Security Method the network is using. In this example the network is protected with a WPA2 password. If

the network doesn’t require a password, choose None. After making the selection, press forward.

Taking into use: Connecting Hublet Dock to a network 3/4

Dock: Maintenance mode

start screen view

Dock: Network Settings

Dock: Network mode

Dock: Security method

Dock: IP address mode

13/03/2019