Quick Guide

HUBLET INSTALL QUICK GUIDE
JANNE BERGLUND
5. Click “Restart”
➔ Docking Station will restart with the selected SW version running.
Configure the Docking Station Network connection
NOTE: The Docking Station can connect to the network by using a Fixed LAN connection
(preferred) or a WiFi connection
1. Click on Network Settings
2. Click “Modify”
3. Select “Wired” or “Wireless” connection
4. If “Wireless”
a. Select IP Address Mode (Dynamic/Static)
b. Enter SSID
c. Select Security Method (Open/WPA/WPA2)
d. Enter Password if secured wifi
e. Hublet Cloud Address is predefined (api.hublet.fi)
f. If Static: configure Static IP, Network Mask, Default Gateway IP
5. If “Wired”
a. Select IP Address Mode (Dynamic/Static)
b. Hublet Cloud Address is predefined (api.hublet.fi)
c. If Static: configure Static IP, Network Mask, Default Gateway IP
6. Click “Save”
7. Click “OK” to return to main menu
8. Click “Exit” to exit Maintenance menu
➔ Docking station is connected to network and Hublet cloud if the icon in the lower right
corner is green when Docking Station is activated on display
NOTE: it is possible to configure the Docking Station to use am HTTP Proxy, if that is in use
in the local network.
Step 10. Add the Hublet Tablets into the Site (on-site)