User's Manual

18
User Manual
14.3 Compa
Attention:
Attention:
The red, blu
accordin
g
14.3 Compass Calibration
Attention
Calibrate compass when abnormal circle flight or skewing occurs during
flight (motor locked, right red LED remains on).
Please conduct calibration in an open outdoor area away from electromagnetic interference.
The compass calibration steps are as follows:
Place right/left sticks at lowest location, toggle them
inward and keep for 5 seconds until the aircraft’s
Left red LED light extinguishes and right red LED
light flashes.
Horizontal 360°rotation of aircraft until left red LED
light is steady on and right red LED light flashes.
Vertical 360°rotation of aircraft (heading down) until
right/left red light is steady on, indicating successful
calibration, and place aircraft at a horizontal location
In case of failure to calibrate, please follow above
procedure to repeat calibration.
14.4 Brushless ESC and Brushless Motor connection diagram
Brushless
motor
Brushless ESC
(blue light)
U
V
W
Head
Brushless ESC
(blue light)
Brushless
motor
Brushless
motor
Brushless ESC
(red light)
U
V
W
Front
Brushless ESC
(red light)
Brushless
motor
Attention:
The red, bl e and black wires of the brushless motors must be soldering to the brushless
ESC according to the illustration.
Ground
heading
Tail toward operator
Keep for 5 seconds
U
V
W
U
V
W