Specifications
MAINTENANCE
1. After 3-4 days of use, follow below steps to clean the diffuser.
2.Before any cleaning operation, switch the unit off and unplug it.
3. Fill the water tank with two tablespoons of running alcohol (Isopropyl alcohol).
The alternatives are one tea spoon of citric acid (soure salt),apple cider/white
vinegar or fresh lemon juice.
4. Let is sock for 5 minutes.
5. Take a Q-tip or soft cloth and lightly scrub the ultrasonic plate that in the center
of water tank and around the tank
6.Pour out the cleaning solution.
7. Wipe the oil residue from around the tank with a soft cloth or paper towel.
Do not clean the product with detergent.
Keep try and clean when not in use to avoid bacteria and mildew(fungus).
Never immerse the unit in water or let water enter the air outlet.
Keep the unit out of the reach of children
Clock Button
1. 1st press clock button, 12HR/ 24HR appears on screen
2. Press “+’or ”-” to select between 12HR/24HR clock
3. 2nd press clock button the digital number will flicker
4. Press “+’or”-” to adjust hour step by step/ Hold “+” or “-”
for fast switching
5. Press clock button to confirm hour
6 Press “+”or “-”to adjust minute step by step/ or
Hold “+” or “-” for fast switching.
7. Press clock button to finish clock setting
Note : Digital number only flicker 5 times , if don’t confirm within 5 seconds.
Unit will confirm current state
Alarm Button
1. To cancel alarm. Press and hold alarm button 2 seconds untill
screen show --:--.
1.Press alarm button, screen show current alarm time,
(if not set alarm, screen show --:--,)the hour digital flicker
2.Press “+” or “-”to adjust hour step by step/Hold
“+”or “-”to fast switching
3.Press alarm button to confirm hour
4. Press “+”or “-” to adjust minute step by step/ Hold
“+”or “-”to fast switching
5. Press alarm button to confirm minute
2. Check current alarm. Short press alarm button to check current alarm.
Before setting the alarm, please check if the set time is the corresponding
clock mode you want（12HR mode or 24HR mode）
3.Alarm ring only ring one time and 30 seconds, press any button to turn off
alarm.
4. If the mist and light is off， and you already set an alram.
when alarm ring, mist & LED light will start working automatically, but must
make sure diffuser plug in and has water in water tank.
Product Name：Aroma Diffuser
Brand: Hubble Model: Hubble Mist
Brand: Aromacare Model: 20005
Capacity:360ml
Material : ABS+PP
7 colorful LED light
Timer : On,1H,3H,6H
Clock & Alarm & bluetooth speaker
Input voltage: AC 100~240V,50/60HZ
Output voltage: DC 24V,0.65A
Power: 13±10%W
Ultrasonic vibration: 2.4MHZ
Warning: Changes or modifications to this unit not expressly
approved by the party responsible for compliance could void
the user’s authority to operate the equipment.
Specification
Importand for Alarm
!