Euclid™ Pendants & Pushbuttons 2000 Hubbell Industrial Controls, Inc. Specification 2000 • August 2000† • Replaces Sept. 1997 Table of Contents Series 2001 Pushbutton Stations, Euclid Type HD & WP ............. 2 Series 2015/2016/2017 Pushbutton Stations, Euclid Type PBC, WPBC, XPBC ........................... 4 Series 2020 Pushbutton Stations, Euclid Type PBP .................... 10 Series 2030 Compact Pendant Pushbutton Stations ...................... 12 Series 2040 Pushbutton Stations, Type PBM .....
001 Specifications Pushbutton Stations Euclid Type HD, S, WP & WSM – Pendant & Surface Mounting – Heavy Duty – NEMA 1 or 3R – Single & Two Speed Features riety of optional features are available: Euclid’s oldest line of rugged time proven pushbutton stations incorporate basic modular construction and are designed for heavy duty applications of all kinds. • Duplex stations. • HD & WP pushbutton stations are furnished as assembled stations.
Diagrams & Dimensions Figure 1 Type HD NEMA 1 "P" Pipe Size 3.625" "B" Single Speed or Momentary Start-Stop Cat# J1/J1A & K1/K1A Figure 3 Type WP NEMA 3R 2.625" FWD 3.875" "P" Pipe Size 3.437" 2001 Pushbutton Inserts 0.5" REV Two Speed Cat# J2/K2 "A" "A" UP DOWN Low Speed High Speed Maintained Start-Stop Cat#JM/KM START STOP Maintained/ Momentary Lift/Drop Cat# JN/KN Maintained Figure 2 Type S NEMA 1 Surface Mounting 0.218"ø Mtg. Hole (4) Internal LIFT 3.625" "A" 5" 0.375" 1.
2015/16/17 Specifications Euclid™ Type PBC / WPBC / XPBC Pendant Pushbutton Stations Features The modular, cam-operated, PBC pushbutton insert is used in all PBC, WPBC and XPBC pushbutton stations. Only the style of the housing and operator varies to meet environmental requirements. • 150VAC or 300VDC • Unique, plungeroperated, Nylatron® cam plates. • Contact blocks easily inspected and replaced. • Up to 5–speed points.
Bulletin 2015 Heavy-Duty – Cam-Operated NEMA Type 1 Enclosure Series PBC Pendant Pushbutton Stations represent the ultimate in custom engineering for specialized applications that can benefit from the unique operating cam feature. • 150VAC or 300VDC • NEMA 1 – General Purpose, Indoor Service • Steel enclosure body. • Fiberglass rear access/ insulating cover.
2015/16/17 2016 Application Info Euclid™ Type WPBC Pushbutton Stations Bulletin 2016 Heavy-Duty – Cam-Operated NEMA Types 3R, 4 or 13 Enclosure WPBC stations use the same pushbutton inserts as the PBC Stations. The WPBC enclosures are made of machined extruded aluminum. • 150VAC or 300VDC • NEMA 3R – Rainproof & Sleet Resistant, Outdoor Service (Standard) • Up to five speed points and eight common circuits for each direction. • One to fourteen buttons. • Easy one-hand operation.
Bulletin 2017 Heavy-Duty – Cam-Operated NEMA Type 7 Class 1, Group C or D, Div. 1 or 2 Indoor Enclosures XPBC Stations use inserts similar to the PBC and WPBC stations. XPBC enclosures are made of cast aluminum and are engineered to meet hazardous duty requirements. • 150VAC or 300VDC. • Rated for NEMA Type 7, Class 1, Group C or D, Div. 1 or 2, Indoor Hazardous Locations. • Up to five speed points and eight common circuits for each direction. • Stainless steel operating plungers.
No. of Buttons “A” “B” “C” Conduit Size Approx. Wt. (lbs.) "B" Pipe Size Figure 3.12" Type PBC Pendant – w/o Toggle Switch 2 4 6 8 10 12 7.81" 13.06" 17.81" 22.56" 27.31" 32.06" 1.25" 1.25" 1.25" 1.50" 1.50" 1.50" — — — — — — 3.75 6.50 9.00 11.50 14.00 16.50 1 1 1 1 1 1 2 4 6 8 10 12 11.06" 15.81" 20.56" 25.56" 30.06" 34.81" 1.25" 1.25" 1.50" 1.50" 1.50" 1.50" — — — — — — 4.50 7.25 9.75 12.25 14.75 17.25 2 2 2 2 2 2 1.25" 1.25" 1.25" 1.50" 1.50" 1.50" 1.50" — — — — — — — 5.00 9.75 14.
0.34"ø Mtg. Hole (4) 4.00" 0.63" Mtg. Hole (2) 0.44" 2.12" 6.00" "B" Pipe Size 5.88" "B" Pipe Size 2.00" "C" "A" 0.5" 0.38" 2.00" 0.75" 2.75" 4.00" 0.12" 4.88" Figure 4 Type SWPBC, NEMA 3/4/13 Enclosure Surface Mounting Figure 5 Type XPBC, NEMA 7 Enclosure 0.44"ø Mtg. Hole (4) "B" Pipe Size (2) "B" Pipe Size 6.00" 0.63" Mtg. Hole (2) 8.5" 6.12" 5.88" 0.5" 2.00" "A" "C" 0.75" "A" 2.00" 6.50" 0.5" 5.88" 0.12" 6.00" 7.
2020 Specifications Euclid™ PBP Pendant Pushbutton Station Weather-Proof Rubber Enclosure NEMA 3R — Plug In Inserts — 1 To 5–Speed Over a half century of Euclid experience in pushbutton design and manufacturing has been incorporated into the unique PBP design. These highly reliable pendants feature maximum safety and durability, ease of installation and maintenance and minimum down time. • PBP Pushbutton Stations can be ordered completely assembled or in component kit form from stock.
Specifications Single Speed Plug-In Inserts Back Cover Universal Hanger Bracket FWD REV 2020 Momentary N.O. Cat# PG1 top Pilot Light rear view Momentary N.O. & N.C. Maintained N.O. & N.C.
2030 Specifications Compact Pendant Pushbutton Station NEMA Type 4X Enclosure Hubbell’s Compact Pendant Stations are typically used to control industrial cranes and hoists or the remote control of industrial machines. This high-quality pendant station features a tough molded polymer housing that meets the most rigorous requirements of industrial applications and their environments for control of electric hoists. The compact pendant is rated NEMA 4X when used with the cord connector kit.
Diagrams & Dimensions DC NEMA P300 125V 1.1A 250V 0.55A DC Single – Speed† Two – Speed† Momentary (on/off) 125V — 250V — N/O 1 * OSHA limits pendant voltage to 150VAC or 300VDC Com. N/O 2 N/O 1 Com. N/C 1 Bott. Tab Top 240V* 1.5A Bott. 3A Ctr. NEMA B300 240V* 3A 120V Top AC 6A Bott. NEMA A300 120V Ctr.
2040 Specifications Euclid™ PBM Pendant Pushbutton Stations The Multi-Purpose PBM Pendant Pushbutton Stations have been designed to use 22mm NEMA 4X pushbutton elements to provide full flexibility. Spacing of the mounting holes will permit enlarging the hole to install the larger 30mm pushbutton elements if desired. Each enclosure is provided with a full complement of standard self-adhesive nameplates to meet most pendant pushbutton applications.
Specifications Standard Pushbuttons No. of Speeds * Contact Sequence Speeds 1 2 Circuits A B One One One One One One Two* One One One No. of Contacts NO NC 1 1 1 1 0 1 2 2 2 2 1 1 1 0 1 0 0 2 2 2 Button Color Part No.
Specifications 2040 Selector & Toggle Switches Hubbell’s selector switches are available in 2 or 3 position maintained or spring return operators. Hubbell also has a 2 position toggle switch that is rated at 10 amps. Circuits Operator Type of Return Part No.
Specifications Dimensions 0.86" (22) 0.86" (22) 0.91" (23) Maintained “Push-Pull” Buttons 0.91" (23) 1.10" (28) ; ; 1.73" (44) 1.42" (36) 1.42" (36) 0.86" (22) Cord Connector Kit Assembly 1.14" (29) 1.22" (31) (18) 0.71" 1.22" (31) 1.14" (29) 1.10" (28) 2.00" (51) ; ; ; ; ;;; ;;; 1.22" (31) 1.10" (28) 0.79" (20) (16) Pilot Lights Mushroom Head Pushbuttons 0.86" (22) 0.86" (22) (19) 0.75" 1.22" (31) 0.86" (22) 1.42" (36) 1.
4211 Specifications Mini-Master Switch The Euclid Mini-Master Switch uses a handle operated cam switch mechanism in a NEMA rated housing. It is engineered for use where master switch control is preferred, for CMAA duty overhead crane and similar applications. • Housings for surface or flush mounting. • NEMA Types 1, 3, 4 and 13. Application Euclid Mini-Master Switches are engineered to meet the need for a small, multi-circuit master switch for installations such as: small crane cabs, and mill auxiliaries.
Off M ax .T ra ve l 44° 5.25" 0.31" 6.12" Flush Mounted Mini-Master Switch 3.00" 3A 240V — 125V 1.1A 250V 0.55A 440/428-1161 • Fax 440/428-7635 0.22"ø Mtg. Holes (4) 0.41" 3.50" 0.25" 120V 5.00" 6.75" 3.00" Single Break 0.31" 0.88" Surface Mounted Mini-Master Switch 0.25" Contact Ratings ad. 5" R 4.38" 5.38" DC el av Tr . ax M 3.75" 2.25" 0.69" 6.75" 4.38" NEMA P300 44° 0.38" 3.06" 0.38" 3.06" 0.41" 0.75" 3.50" AC 44° 5.31" 2.88" 0.44" 1.75" 2.25" 0.44" 0.
Prices Are Subject To Change Without Notice Hubbell Industrial Controls, Inc. HUBBELL JPS-800-2M © 2000 Printed in U.S.A.
