User Guide

7
CONTROL THERMOSTAT
The temperature of the water in the heater is regulated by the adjustable, automatic, immersion
thermostat located behind the jacket front cover. This automatic control is set at the factory to
maintain a water temperature of 125°F to reduce the risk of scald injury. The thermostat dial is
graduated with markings form 1 to 10 with 10 being the hottest.
Capillary Tube and Bulb
OUTER SHELL AND INSULATION
The tank is encapsulated in 1-inch thick fiberglass insulation. The tank and insulation is protected by a
painted steel protective jacket.
TEMPERING VALVE (Optional)
An optional tempering valve may be supplied to increase the amount of available hot water. The ½”
NPT valve is adjustable from 100° - 130° F and is typically used when supplying hot water to multiple
lavatories from a single CE110.
WALL BRACKET (Optional)
An optional wall bracket is available
for easy mounting of the heater.