Technical Bulletin

www.hubbell-wiring.com
For complete listing of products see our full line catalogs.
10
Hubbell’s complete line of electrical components and devices includes
cost-effective alternatives to conventional wiring methods, along with fast
installation and excellent performance. It also allows for easy retrots to
existing hard-wired installations.
• Reconfigurable factory defined assemblies that can be easily installed as a cost effective alternative to
conventional wiring methods, supports moves, adds and changes
• Enables fast installation and high technical performance for 20A and 30A circuits up to 600V
Linkosity
®
Process Automation
Cables and Receptacles
Power Components 20A, 30A up to 600V
Device Type Ratings Wires Conductor Colors** Length (ft.)
PH
PM
PN
PF
PG
PQ
PR
PS
RF
RM
Double Ended Cable - Male/Female Straight
Male Single Ended Straight
Male Single Ended 90°
Female Single Ended Straight
Female Single Ended 90°
Double Ended Cable with Female 90°
Double Ended Cable with Male 90°
Double Ended Cable with (2) 90° Connectors
Female Receptacle; ½" N.P.T. rear thread
Male Receptacle (Inlet); ½” N.P.T. rear thread
20 20A up to 600V 02 -
05
PA
Green/Yellow;
Black (all others)
PB
Green/Yellow
White
Black (all others)
**Other color
codes available
upon request
001
005
010
015
020
025
030
035
040
045
050
1'
5'
10'
15'
20'
25'
30'
35'
40'
45'
50'
23 20A up to 600V
Specialty construction
(Includes isolated ground
on 6 wire and 10AWG
super neutral conductor
on 5 and 6 wire devices)
03
04
05
06
30 30A up to 600V 04
Example Catalog Number: PH2306PB050
LINKOSITY
®
Tees
Description Catalog Numbers
M/F/F Tee, 20A, 2P
M/F/F Tee, 20A, 3P
M/F/F Tee, 20A, 5P
M/F/F Tee, 20A SNIG, 4P
M/F/F Tee, 20A SNIG, A Phase Tap
M/F/F Tee, 20A SNIG, B Phase Tap
M/F/F Tee, 30A, 4P
TX2002002002T00
TX2003002003T00
TX2005002005T00
TX2304002304T00
TX2306002304A00
TX2306002304B00
TX3004003004T00
Closure Caps
For use with
Female ReceptacleDescription Male Inlet
20A and 30A
Receptacle
Closure Cap
CCMBC CCFBC
MotorQuick
®
Description
Type 1
HBL1389D
Non-Metallic
Type 2
HBLDS3
Non-Metallic
Type 2
HBLDS3SS
Stainless Steel
Type 2
HBLDS3SSR
Stainless Steel
30A 3 Pole
600V AC
With (1) pre-wired
LINKOSITY
®
female
receptacle (load side)
HBL1389MQR HBLDS3MQR HBLDS3SSMQR HBLDS3SSRMQR
With 5 ft. pre-wired
LINKOSITY
®
female cable
(load side)
HBL1389MQ5 HBLDS3MQ5 HBLDS3SSMQ5 HBLDS3SSRMQ5
With (1) pre-wired
LINKOSITY
®
male receptacle
(line side) and (1) pre-wired
LINKOSITY
®
female
receptacle (load side)
HBL1389MQR2 HBLDS3MQR2 HBLDS3SSMQR2 HBLDS3SSRMQR2
• Combines Circuit-Lock
®
motor disconnect with plug-and-play LINKOSITY
®
system for faster
installation and replacement of motors.
• Easily retrofits to existing hard wired installations with LINKOSITY
®
components.
• HBLDS3 series are IP69k and certified by
for hygiene in food processing applications.
NEC
®
430.102 (B)
(1) Separate Motor
Disconnect. A
disconnecting means
for the motor shall be
located in sight from
the motor location and
the driven machinery
locations.
(2) Controller Disconnect.
The controller
disconnecting means
required in accordance
with 430.102(1) shall be
permitted to serve as the
disconnecting means for
the motor if it is in sight
from the motor location
and the driven machinery
location.