Cut Sheet - Hubbell - Electrical

COMMERCIAL
CONSTRUCTION
A Division of Hubbell Incorporated (Delaware)
©2019 Hubbell. All rights reserved. Information subject to change. Trademarks are property of their respective owners.
RACO
3902 W. Sample St.
South Bend, IN 46619
574-234-7151
www.hubbell.com/raco/en
Commercial, Industrial and Residential Electrical Products
RA_SEL_MCPCS_434 rev1
Instructions
1. Remove 1-1/8" (blue) outer jacket from each pair of control/signal wires per strip gauge.
2. Strip 3/8" insulation from individual control/signal
wires (typically gray and purple) per strip gauge.
3. Fully insert stripped wires into ports, gray wires
on gray side, purple wires on purple side.
Connection ports are clear to confirm full
wire insertion.
4. Group wire pairs together and snap close the shielding wings.
For permanent install only, not reusable. This product should be installed ONLY by an electrician
or other qualified person in accordance with national and/or local requirements.
For 16 AWG Solid Copper Conductor ONLY
COPPER TO COPPER ONLY. Not for use with Aluminum wire
Non-grounding/Bonding Special-use Connector
Not for use with grounding/bonding purposes/conductors
600V max | 10A max | 105° C (221° F) rated
Push-In Wire Connectors
For MC-PCS Lighting Control / Signal Circuits
INSTRUCTIONS
1 Remove 1-1/8" (blue) outer jacket from each pair of control/signal wires per strip gauge.
2 Strip 3/8" insulation from individual control/signal wires (typically gray and purple) per strip
gauge.
3 Fully insert stripped wires into ports, gray wires on gray
side, purple wires on purple side. Connection ports are
clear to confirm full wire insertion.
4 Group wire pairs together and snap close the shielding wings.
For permanent install only, not reusable. This product should be installed ONLY by an
electrician or other qualified person in accordance with
national and/or local code requirements.
For 16 AWG Solid Copper Conductor ONLY
COPPER TO COPPER ONLY. Not for use with Aluminum wire
Non-grounding/Bonding Special-use Connector
Not for use with grounding/bonding purposes/conductors
600V max | 10A max | 105° C (221° F) rated
3
/
4
"
1-
1
/ 8
"
Strip Gauge (1:1 scale)
HUBBELL COMMERCIAL CONSTRUCTION
A DIVISION OF HUBBELL INCORPORATED (DELAWARE)
www.hubbell.com/raco/en
MCPCS_NS_REV-A
3
/ 8 "
How-To Videos
www.hubbell.com/raco/en/Videos/MC-PCS_Connectors
TO BE SOLD ONLY WITH
INSTALLATION INSTRUCTIONS
Push-In Wire Connectors
For MC-PCS Lighting Control/Signal Circuits