Cut Sheet

KILLARK FITTINGS
H
A
Z
L
O
C
H
A
Z
L
O
C
F
I
T
T
I
N
G
S
F
I
T
T
I
N
G
S
WWW.HUBBELL-KILLARK.COM
F57
GE SERIES
ALUMINUM AND IRON OUTLET BODIES
FEATURES-SPECIFICATIONS
Applications
GE series conduit boxes are installed in
conduit systems within hazardous areas to:
• Protect conductors in threaded rigid
conduit
• Act as pull and splice boxes
• Interconnect lengths of conduit
• Change conduit direction
• Provide access to conductors for
maintenance and future system changes
Features
GE conduit outlet boxes have:
• GEM, GEC and GES have water shedding
cover – suitable for wet locations when
mounted in upright position
• External cover threads on body protecting
conductors from damage during pulling
• No pinching of conductors during cover
installation
• Ten different hub arrangements
• Taper threaded hubs to provide ground
continuity
• Smooth integral hub bushing to protect
conductor insulation when pulling
• Internally threaded cover openings for
additional wiring room
• Covers furnished with boxes
• Weather-resistant finish
• Green ground screw standard in all boxes
• 1/2”, 3/4” and 1” Bodiesj
Class I, Div. 1 & 2, Groups B, C & D
Class I, Zone 1, Groups IIB, IIA
• 1-1/4”, 1-1/2”, and 2” Bodies
Class I, Div. 1 & 2, Group D
Class I, Zone 1, Group IIA
• Class II, Div. 1 & 2, Groups E, F, G
• Class III
• For GEJ Series CSA applications for Class I
Group C, seal conduit within 18 inches
• Type 4 & 4X
GEC Type
Dimensions
Material/Finish
Aluminum
• BODY Copper-free aluminum
(less than 4/10 of 1%)
• FINISH Electrostatically applied powder
coating
• COVER (Aluminum)
Copper-free aluminum (less than 4/10
of 1%). Electrostatically applied powder
coating
Iron
• BODY Duraloy iron alloy
• FINISH Tri-coat finish of electrozinc,
chromate sealant, and electrostatically
applied powder coating
• COVER (Aluminum)
Copper-free aluminum (less than 4/10
of 1%). Electrostatically applied powder
coating
Size Ranges
• Hub – 1/2” to 2”
• Cover opening – 2-1/16” to
4-7/8” diameter
Applicable Third Party Standards
UL Standards: 886 and 1203
CSA Standard: C22.2 No. 30
Fed Spec: W-C-586D
Mil Spec: F-28675
GEJ
E Type
GEC
E Type
E Type
File No. E 10514
Certified File No. LR11716
E TYPE OUTLET BODY*
CATALOG NUMBER
HUB
SIZE
DIMENSIONS
COVER
OPENINGS
VOLUME
CU. IN.
KILLARK
ALUM.
DURALOY
IRON
A B C D E F
GECET-1 GECET-1M 1/2”
3-11/16”
(94)
3-5/8”
(92)
2-11/16”
(68)
2-3/4”
(70)
1”
(25)
13/16”
(21)
2-11/16”
(68)
18
GECET-2 GECET-2M 3/4”
3-11/16”
(94)
3-5/8”
(92)
2-11/16”
(68)
2-3/4”
(70)
1”
(25)
13/16”
(21)
2-11/16”
(68)
18
GECET-3 GECET-3M 1”
3-11/16”
(94)
3-5/8”
(92)
2-11/16”
(68)
2-3/4”
(70)
1”
(25)
1-1/8”
(21)
2-11/16”
(68)
19
— — 1-1/4” — — — — — — — —
GEJET-5 GEJET-5M 1-1/2”
6-1/4”
(159)
4-3/8”
(111)
4-7/8”
(124)
3-9/16”
(90)
1-3/16”
(46)
1-3/16”
(46)
4-7/8”
(124)
75
* For GROUP B applications, contact factory.
j 1/2”, 3/4” and 1” GEC Bodies Listed and Certied for:
Class I, Div. 1 & 2, Groups B, C, D
Class I, Zones 1 & 2, Groups IIB + H
2
Class II, Div. 1 & 2, Groups E, F, G
Class III
Type 4X (NEMA)