Installation Manual

Page 4 of 5
3940 Dr. Martin Luther King Drive
St. Louis, MO 63113
P/N KIL00921204 FORM NO. K1204 ECO-6-058-15 R11/2015
B) GUFX-26 Wall Mount Luminaire ttings
with EZBA12 Adapter;
See Illustrations 4, 5, & 6:
1. Disassemble the luminaire from the mount by
unscrewing the locking bolt between the wall
mount box and the luminaire body (Il. 4).
2. Disconnect the power supply leads and
remove the luminaire body.
3. Attach the EZBA12 adapter assembly (Ill.
5). NOTE: Make sure the mount has the
matching thread size and pitch.
4. Remove the terminal block from the adapter
by loosening the 2 mounting screws. Connect
the supply ground wire to the ground wire
supplied with the adapter. Connect the supply
leads to the terminal block. Reinstall the
terminal block and tighten securely in place
(Ill. 6).
5. For installation of new luminaire housing,
refer to separate instruction sheet supplied
with the Killark EZ, EMS, or EBF series
luminaires.