Installation Manual
3940 Dr. Martin Luther King Drive
St. Louis, MO 63113
P/N KIL00921204 FORM NO. K1204 ECO-6-058-15 R11/2015 Page 3 of 5
1. INSTALLATION INSTRUCTIONS
A) EV-22 with Each 12 or GUFX-26 with
EACH16 luminaire îš¿ttings;
See Illustrations 1, 2, & 3:
1. Disassemble the luminaire from the mount by
unscrewing the locking bold between the cover
and the luminaire body (Ill. 1).
2. Disconnect the power supply leads and remove
the luminaire body.
3. Attach the appropriate adapter (EACH12 or
EACH16) to the existing ceiling mount (Ill.
2). Be sure to tighten the locking screw/bolt
between cover and adapter before going to next
step.
4. Remove the terminal block from the adapter by
loosening the 2 mounting screws. Connect the
ground wire to the green screw in the adapter.
Connect the supply wires to the terminal block
(Ill. 3). Reinstall the terminal block and securely
tighten it in place.
5. For installation of new luminaire housing, refer
to separate instruction sheet supplied with the
Killark , EZ, EMS or EBF series luminaires.