Cut Sheet

Certificate:
2218736
Master Contract:
151933
Project:
2429874
Date Issued:
July 19, 2011
DQD 507 Rev. 2009-09-01 Page: 3
• Flexible fixture fittings, rain-tight , Series EKJ, conduit size ½ and 3/4 in. with flexible lengths ranging from
4 to 36 in. Inside radii of bends should not be less than 10 in. for the 1/2 in. and 12 in. for the 3/4 in. EKJ may
be followed by UF, may be followed by MF or FF, maybe followed by Ex.
Class I, Groups C and D; Class II, Groups E, F and G; Class III:
• Flexible fixture fittings, rain-tight, Series EKJ, conduit size 1 in. with flexible lengths ranging from 4 to 36 in.
Inside radii of bend should not be less than 14 in. for the 1 in. EKJ may be followed by UF, may be followed
by MF or FF, maybe followed by Ex.
APPLICABLE REQUIREMENTS
CAN/CSA-C22.2 No 0-10
CAN/CSA-C22.2 No 25-1966
CAN/CSA-C22.2 No 30-M1986
CAN/CSA-C22.2 No. 0.4-M1982
General Requirements
Enclosures for Use in Class II, Groups E, F and G
Hazardous Locations
Explosion-Proof Enclosures for Use in Class I
Hazardous Locations.
Bonding and Grounding of Electrical Equipment
(Protective Grounding)
CAN/CSA-C22.2 No 94-M91 Special Purpose Enclosures – For Industrial Equipment
ANSI/UL 50E (11th ed.) Enclosures for Electrical Equipment
ANSI/UL 886 (10th ed.) Outlet Boxes and Fittings for use in Hazardous
(Classified) Locations
ANSI/UL 1203 (4th ed.) Explosion-Proof and Dust-Ignition-Proof Electrical
Equipment For use in Hazardous (Classified) Locations
MARKINGS
Metal name plate fits over the outer braid is secured by steel strapping which fits through slots at the ends of the
name plate;
Manufacturer's name, Trade Mark or Master Contract Number;