Cut Sheet

Features - Specifications
 Single weave
 Tin-coated bronze for added corrosion resis-
tance
 Uniform gripping power
 Provides permanent support when cable end
is available to be installed through the grip
 Fast and easy installation
 Will not damage electrical cable
 Helps prevent cable pullout
 Rings designed to fit schedule 40 standard
rigid conduit
 CSA Certified File #LR701228
CC125R3
CONDUIT RISER GRIPS, CLOSED MESH Suitable for schedule 40 conduit only
CABLE
SIZES .50-.62 .63-.74 .75-.99 1.00-1.24 1.25-1.49 1.50-1.74
IN. (cm.) (1.27-1.57) (1.60-1.88) (1.90-2.51) (2.54-3.15) (3.17-3.78) (3.81-4.42)
LENGTHS 8 9 11 12 12 14
IN. (cm.) (20.32) (22.86) (27.94) (30.48) (30.48) (35.56)
CONDUIT CATALOG NUMBERS
SIZES APPROX. BREAKING STRENGTH LBS (N)
3/4 CC050R34
530 (2357)
1 CC050R1 CC062R1
490 (2179) 790 (3514)
1 1/4 CC050R114 CC062R114 CC075R114
450 (2002) 740 (3292) 1030 (4581)
1 1/2 CC050R112

CC062R112 CC075R112 CC100R112
410 (1824) 690 (3069) 970 (4315) 1610 (7161)
2 CC050R2 CC062R2 CC075R2 CC100R2 CC125R2
370 (1645) 640 (2847) 920 (4092) 1520 (6761) 1610 (7161)
2 1/2 CC050R212

CC062R212

CC075R212

CC100R212 CC125R212 CC150R212
330 (1468) 590 (2624) 870 (3870) 1430 (6361) 1510 (6716) 1610 (7161)
3 CC050R3

CC062R3

CC075R3 CC100R3 CC125R3 CC150R3
290 (1290) 530 (2357) 820 (3647) 1340 (5960) 1400 (6227) 1490 (6627)
3 1/2 CC062R312 CC075R312 CC125R312

CC150R312

480 (2135) 770 (3425) 1300 (5782) 1370 (6084)
4 CC075R4 CC100R4 CC125R4 CC150R4

720 (3203) 1160 (5160) 1190 (5293) 1250 (5560)
CABLE
SIZES
1.75-1.99 2.00-2.49 2.50-2.99 3.00-3.49 3.50-3.99
IN. (cm.)
(4.44-5.05) (5.08-6.32) (6.35-7.59) (7.62-8.86) (8.89-10.13)
LENGTHS
15 17 18 20 21
IN. (cm.)
(38.10) (43.18) (45.12) (50.80) (53.34)
CONDUIT CATALOG NUMBERS
SIZES APPROX. BREAKING STRENGTH LBS (N)
2 1/2 CC175R212
2150 (9563)
3 CC175R3 CC200R3
1990 (8851) 3260 (14500)
3 1/2 CC175R312 CC200R312 CC250R312
1830 (8140) 2970 (13211) 3260 (14500)
4 CC175R4 CC200R4 CC250R4 CC300R4
1670 (7248) 2680 (11921) 2890 (12855) 4080 (18148)
4 1/2 CC250R412 CC300R412 CC350R412
2520 (11208) 3470 (15434) 4080 (8228)
5 CC175R5 CC200R5 CC250R5 CC300R5 CC350R5
1340 (5960) 2090 (9296) 2150 (9563) 2860 (12721) 3130 (13922)
6 CC200R6 CC250R6 CC300R6 CC350R6
1795 (7984) 1795 (7984) 2245 (9986) 2245 (9986)
Application:
Supports vertical or sloping cable in
schedule 40 standard rigid conduit.
Prevents sagging lines and strain on
terminals by transferring weight to support
rim of the conduit.
Ideal For Use In:
 Building and Pole Risers
 Underground Cable Lines
 Where Ring Termination
Is Practical
To be discontinued when supplies are exhausted.
CAUTION: Never use grips to approximate breaking strength. Refer to pg. O-
33 for safety and working load factors.
Note: Stainless steel support grips are available upon request. Consult factory.
Specifications are subject to change without notice.
APPLICABLE REQUIREMENTS
Bryant Economy Conduit Riser Cable Grips meet the following requirement:
NEC 300-19 Support of conductors in vertical raceways
Support - Conduit Riser
Ring Type Closed Mesh
O
20