Installation & Assembly

42409

ASSEMBLY & INSTALLATION INSTRUCTIONS

Sprig Sconce 206050

B405

(Figure 2)

GROOVE

To Install Glass (Figure 2)

If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you

purchased this product. We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this

xture.

4 OF 4

1. Unpack glass (I).

2. Install bulb (H) (not included) into

socket (F).

3. Place glass (I) over the bulb (H).

4. Slide glass (I) into cup (G) until groove in

glass lines up with thumb screws (J).

Note: Thumb screws are shipped in

cups. It may be necessary to loosen

thumb screws so glass can pass into

cup. Screws will not need to be removed

completely.

5. Tighten thumb screws (J) evenly to

secure glass (I).

Note: Do not overtighten screws as this

could break glass.

6. Repeat steps for remaining glass.

7. Restore electricity at main breaker.