B405 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Sconce 206050 42409 1 OF 4
B405 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Sconce 206050 Component Parts A Fixture B Crossbar C Ground Screw D Threaded Stud (2) E Knob (2) F Socket (3) G Cup (3) H Bulb (not included) I Glass (3) J Thumb Screws (9) 42409 2 OF 4
B405 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Sconce 206050 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
B405 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Sconce 206050 To Install Glass (Figure 2) 1. Unpack glass (I). 2. Install bulb (H) (not included) into socket (F). 3. Place glass (I) over the bulb (H). 4. Slide glass (I) into cup (G) until groove in glass lines up with thumb screws (J). Note: Thumb screws are shipped in cups. It may be necessary to loosen thumb screws so glass can pass into cup. Screws will not need to be removed completely. G J F H GROOVE 5.
