Installation & Assembly

ASSEMBLY & INSTALLATION INSTRUCTIONS
Splash 3 Light Pendant 138913
A653
45148
4 OF 6
13. Tighten set screw (L) in clutch (K) rmly with hex wrench provided.
14. Using two machine screws (not provided), fasten the crossbar (B) to the electric box.
15. Using suitable wire connectors (not provided) connect fixture wires to supply (white to white and black to black). Attach
a pigtail lead to the crossbar ground screw (C). Holding canopy (E) close to the ceiling connect all ground wires (bare
copper or green to bare copper or green). Push wires back into electrical box.
16. Push canopy (E) against ceiling and secure with canopy ring (F).
17. Follow instructions on next page to install bulbs (R) and glass (N).
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON SECURELY AND NO BARE WIRE IS EXPOSED.
CAUTION: BE SURE NO WIRES ARE PINCHED BETWEEN THE CANOPY (E) AND THE CEILING.
LARGE DIAMETER PIPE
TAPERED END
OF PLASTIC SLEEVE
(Figure 1)