Manualshelf

Installation Instructions

ManualsBrandsHubbardton Forge ManualsLightingPlanar 1 - Light Single Geometric LED Pendant
123
HUBBARDTONFORGE.COM
-, -   
154 RT. 30 SOUTH
•
CASTLETON, VERMONT 05735
32565A
Assembly & Installation Instructions
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you purchased this product.
We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this xture.
Attach Fixture Pipes (Figure 1)
Component Parts
A Fixture Pipe (2)
B Fixture Coupling (2)
1. Carefully unpack the xture from the carton.
2. Carefully thread one xture pipe (A), threaded end rst, over
xture wires.
3. Apply a drop of the supplied thread locking compound to
the internal threads of the xture coupling (B) and screw x-
ture pipe (A) into xture, being careful not to twist the wires.
Note: Application of the thread locking compound is necessary to
prevent the stem from loosening during regular maintenance and
cleaning of the fixture. Be certain to apply the compound.
4. Screw second fixture pipe (A), again using locking com-
pound, into fixture coupling (B) other side of fixture without
wires.
5. See instructions below to complete the installation.
Assemble Canopy Pipes to Ceiling Bracket (Figure 2)
Component Parts
C Hex Nipple (2)
D Lock Washer (2)
E Ceiling Bracket
F Canopy Pipes (2)
P Swivel (2)
1. Hex Nipple (C) and Lock Washer (D) are shipped installed
in swivel at top of Canopy Pipe (F). Remove these parts for
use in next step.
2. Insert threaded end of hex nipple (C) down through lock
washer (D), ceiling bracket (E) and into swivel at the end of
canopy pipe (F). Note: Ceiling bracket should be oriented
with the threaded studs pointing down.
3. Tighten hex nipples (C) securely being sure the notches in
the swivels are aligned.
A387
Planar Linear Pendant 139720D
Page 1 of 3
CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND
PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with
applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*
Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.
(Continued)
(Figure 1)
A
D
C
E
P
F
B
(Figure 2)

Summary of content (3 pages)