A528 ASSEMBLY & INSTALLATION INSTRUCTIONS Penumbra Pendant 139810 MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A528 ASSEMBLY & INSTALLATION INSTRUCTIONS Penumbra Pendant 139810 Component Parts A Canopy B Canopy Cover Plate C Cap D Threaded Nipple E Lock Nut F Ground Screw G Cupped Washer H Fixture I Support/Supply Cable (2) J Gripper (2) K Holder (4) L Decorative Element M Knobs (4) MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A528 ASSEMBLY & INSTALLATION INSTRUCTIONS Penumbra Pendant 139810 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A528 ASSEMBLY & INSTALLATION INSTRUCTIONS Penumbra Pendant 139810 To Install Fixture (Figure 2) 1. Locate the positive (+) label on top of the fixture (H). 2. Align the positive (+) sticker on the fixture (H) with the positive (+) sticker on the gripper (J). 3. Push the support/supply cable (I) from the positive (+) side of the fixture (H) into the positive (+) gripper (J). Push the cable (I) in far enough so that the cable (I) exits the side of the gripper (J). 4.
A528 ASSEMBLY & INSTALLATION INSTRUCTIONS Penumbra Pendant 139810 To Complete Installation (Figure 3) 1. Locate decorative element (L) with knobs (M) attached. 2. Slide element (L) into fixture (H). 3. Align knobs (M) with holders (K) and lower decorative element (L) into holders (K). 4. Center decorative element (L) in fixture (H). 5. Restore electricity at main breaker.
