Installation & Assembly

ManualsBrandsHubbardton Forge ManualsLightingOtto 2 - Light Unique / Statement Globe Pendant

Assembly & Installation Instructions A469

For Otto Small Sphere Kitchen Pendant 161305 Page 1 of 4

Modern American Blacksmiths | Fine, Hand Crafted Lighting

Castleton, Vermont USA | HUBBARDTONFORGE.COM 36887

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Summary of content (4 pages)

PAGE 1
Assembly & Installation Instructions A469 For Otto Small Sphere Kitchen Pendant 161305 Page 1 of 4 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
PAGE 2
Assembly & Installation Instructions A469 For Otto Small Sphere Kitchen Pendant 161305 Page 2 of 4 Component Parts A Crossbar B Nipple C Ground Screw D Lock Nut E Fixture F Knob G Supply / Support Cables H Bulbs (2) (Not Included) I Glass Tube J Mesh Tube K Glass Globe Modern American Blacksmiths | Fine, Hand Crafted Lighting Castleton, Vermont USA | HUBBARDTONFORGE.
PAGE 3
Assembly & Installation Instructions A469 For Otto Small Sphere Kitchen Pendant 161305 Page 3 of 4 To Install Fixture (Figure 1) Caution: Be sure power is off at the main breaker box prior to installation 1. Carefully unpack the fixture from the carton. 2. Knob (F) is shipped installed on nipple (B). Remove knob (F) from nipple (B) and retain for later use. 3. Screw nipple (B) into crossbar (A). 4. Spin nut (D) onto nipple (B), leave it loose. 5.
PAGE 4
Assembly & Installation Instructions A469 For Otto Small Sphere Kitchen Pendant 161305 Page 4 of 4 To Install Glass (Figure 2) 1. Install bulbs (H) (not included). 2. Screw glass tube (I) in the socket cup until it stops. Note: You can screw the glass tube (I) into either socket cup to start. 3. While holding the glass tube (I) at an upward angle, slide the mesh tube (J) over the glass tube. 4.