Installation & Assembly

ASSEMBLY & INSTALLATION INSTRUCTIONS

Orion Single Pendants 136430 Medium & 136433 Large

A613

44706

13. Using suitable wire connectors (not provided) connect fixture

wires to supply (white to white and black to black). Attach a

pigtail lead to the crossbar ground screw (C). Holding canopy

(E) close to the ceiling connect all ground wires (bare

copper or green to bare copper or green). Push wires back

into electrical box.

14. Push canopy (E) against ceiling and secure with canopy

ring (F).

15. Install bulbs (not included) into sockets (N).

16. Restore electricity at main breaker.

4 OF 4

CAUTION: MAKE SURE WIRE CONNECTORS ARE TWIST-

ED ON SECURELY AND NO BARE WIRE IS EXPOSED.

(Figure 1)

CAUTION: BE SURE NO WIRES ARE PINCHED BE-

TWEEN THE CANOPY (E) AND THE CEILING.

If you need further assistance, or nd that you are missing any

parts, please contact the dealer from which you

purchased this product. We hope you enjoy your xture!

* Hubbardton Forge will not be liable for injury or damage

caused by improper installation, lamping or use of this

xture.

LARGE DIAMETER PIPE

TAPERED END

OF PLASTIC SLEEVE

(Figure 2)

K L

BULB