B374 Assembly & Installation Instructions Orbit Sconce 209335 Page 1 of 4 13" GLASS SHOWN IN INSTRUCTIONS 21" GLASS MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
Assembly & Installation Instructions Orbit Sconce 209335 B374 Page 2 of 4 Component Parts A Fixture B Crossbar Assembly C Ground Screw D #8 Screws (2) E Cover Plate F Knurled Ball G Countersunk Plate H Countersunk Screws (4) I Glass J LED K Foam Tape MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
B374 Assembly & Installation Instructions Orbit Sconce 209335 Page 3 of 4 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
B374 Assembly & Installation Instructions Orbit Sconce 209335 Page 4 of 4 To Finish Installation (Figure 2) 1. Remove knurled ball (F) and cover plate (E). Retain for later use. Note: Magnets are also used to hold cover plate (E) so a small amount of force will be needed to remove cover plate (E). 2. Remove countersunk screws (H) along with countersunk plate (G) and retain for later use. Note: Taking note of plate (G) alignment will aid in later installation. 3.
