A645 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 3 Light 131305 45151 1 OF 5
A645 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 3 Light 131305 Component Parts A Fixture B Fixture Pipe (3) C Fixture Coupling (3) D Mounting Bracket E Plastic Sleeve (3) F Set Screw (3) G Canopy Pipe (3) H Clutch (3) I Swivel (3) J Canopy K Hex Nipple (3) L Lock Washer (3) M Pipe Bracket (3) N # 10 Screws (8) O Cupped Washer P Safety Cable (2) Q Studs (4) R Standoffs (4) S Barrel Knobs (4) T Nut (3) 45151 2 OF 5
A645 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 3 Light 131305 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A645 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 3 Light 131305 contact a qualified electrician. 14. Attach a pigtail lead to the canopy (J) using the provided cupped washer (O) in kit bag and nut (T) installed on mounting bracket (D). 15. Raise canopy (J) close to ceiling and using remaining nuts (T) installed on mounting bracket (D), attach safety cables (P). Safety cables will support canopy while wiring connections are being made. 16.
A645 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 3 Light 131305 K M O R T D L T T I N Q NOTCH P G H E F J P B S C (Figure 2) A BULB If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product. We hope you enjoy your fixture! * Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
