Installation & Assembly
ASSEMBLY & INSTALLATION INSTRUCTIONS
Koi Pendant 2 Light 131303
A644
45150
4 OF 5
contact a qualified electrician.
14. Attach a pigtail lead to the canopy (J) using the provided cupped washer (O) in kit bag and nut (T) installed on mount-
ing bracket (D).
15. Raise canopy (J) close to ceiling and using remaining nut (T) installed on mounting bracket (D), attach safety cable (P).
Safety cable will support canopy while wiring connections are being made.
16. Using suitable wire connectors (not provided) connect îš¿xture wires to supply wires (white to white and black to black).
Connect all ground wires (bare copper or green to bare copper or green) together.
17. Raise the canopy (J) up to the ceiling and secure with barrel knobs (S). Be sure threaded studs (Q) are fully seated in
barrel knobs.
18. Install bulbs (not provided) .
19. Restore electricity at main breaker.
CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON SECURELY AND NO BARE WIRE IS EXPOSED.
CAUTION: BE SURE NO WIRES ARE PINCHED BETWEEN THE CANOPY AND THE CEILING.
LARGE DIAMETER PIPE
TAPERED END
OF PLASTIC SLEEVE
(Figure 1)