A644 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 2 Light 131303 45150 1 OF 5
A644 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 2 Light 131303 Component Parts A Fixture B Fixture Pipe (2) C Fixture Coupling (2) D Mounting Bracket E Plastic Sleeve (2) F Set Screw (2) G Canopy Pipe (2) H Clutch (2) I Swivel (2) J Canopy K Hex Nipple (2) L Lock Washer (2) M Pipe Bracket (2) N # 10 Screws (8) O Cupped Washer P Safety Cable Q Studs (2) R Standoffs (2) S Barrel Knobs (2) T Nut (2) 45150 2 OF 5
A644 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 2 Light 131303 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A644 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 2 Light 131303 contact a qualified electrician. 14. Attach a pigtail lead to the canopy (J) using the provided cupped washer (O) in kit bag and nut (T) installed on mounting bracket (D). 15. Raise canopy (J) close to ceiling and using remaining nut (T) installed on mounting bracket (D), attach safety cable (P). Safety cable will support canopy while wiring connections are being made. 16.
A644 ASSEMBLY & INSTALLATION INSTRUCTIONS Koi Pendant 2 Light 131303 O K M L R D T T N I NOTCH G Q E H P F J S B C A BULB (Figure 2) If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased this product. We hope you enjoy your fixture! * Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
