Installation & Assembly

MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
44665
ASSEMBLY & INSTALLATION INSTRUCTIONS
Vertical Bar Outdoor Sconce with Fluted Glass Lg 307283
B421
4 OF 4
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you
purchased this product. We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of
this xture.
To Install Glass (Figure 3 )
(Figure 3)
I
M
A
N
H
J
L
K
BULB
1. Unpack both inner and outer glass (J & L) and
locate o-rings (K) found in kit bag.
2. Stretch o-rings (K) over one end of inner glass
(J). Position just slightly above bottom of glass
(see gure 3).
3. Install bulb (not included) into socket (H).
4. Place inner glass (J) over the bulb.
5. Slide inner glass (J) with o-ring into cup (I) until it
hits bottom of cup.
Note: Be sure o-rings slide into cup. It may be
necessary to rotate glass or push on o-ring to
allow them to slide into cup evenly.
6. Slide outer glass (L) over inner glass (J) until it
rests on xture (A).
Note: Outer glass (L) needs to slide between
brace (M) and holder (N). Holder (N) will apply
pressure on the glass to hold secure.
7. Restore electricity at main breaker.