Installation & Assembly

MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING

CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM

44665

ASSEMBLY & INSTALLATION INSTRUCTIONS

Vertical Bar Outdoor Sconce with Fluted Glass Lg 307283

B421

1. Carefully unpack the xture (A) from the carton.

2. Using two machine screws (not provided) attach cross-

bar (E) to the electric box.

Note: A new electric box comes with screws. When

replacing a fixture, retain the screws for use with the new

fixture.

3. Thread the nipple (C) into the crossbar (E) and secure

with lock nut (D). Adjust the nipple to proper length to

ensure the xture will t snugly to the wall.

4. Attach a pigtail lead to the ground screw (F) on the

crossbar (E).

5. Using suitable wire connectors (not provided), connect

the xture wires to the supply wires, (white to white,

black to black). Connect all ground wires together.

6. Apply a generous bead of a suitable caulking material to

caulking lip (G) on the xture (Figure 2).

7. Carefully tuck all wires behind the xture. Place xture

(A) over threaded nipple (C) and tighten rmly to mount-

ing surface using cap (B).

8. Complete steps on following page to install glass.

To Install Fixture (Figures 1 & 2)

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH

AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance

with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on xture. Use only recommended bulbs with xture.

Please Note: After installation extra hardware and accessories are possible; our kits are used on multiple products and options.

CAUTION: BE SURE POWER IS OFF AT THE MAIN

BREAKER BOX PRIOR TO INSTALLATION.

CAUTION: MAKE SURE WIRE CONNECTORS ARE

TWISTED ON SECURELY AND NO BARE WIRES ARE

EXPOSED.

3 OF 4

(Figure 1)

(Figure 2)