Installation & Assembly

MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING
CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM
44664
ASSEMBLY & INSTALLATION INSTRUCTIONS
Vertical Bar Outdoor Sconce with Fluted Glass 307281
B420
4 OF 4
If you need further assistance, or nd that you are missing any parts, please contact the dealer from which you
purchased this product. We hope you enjoy your xture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of
this xture.
To Install Glass (Figure 3 )
(Figure 3)
I
M
A
N
H
J
L
K
BULB
1. Unpack both inner and outer glass (J & L) and
locate o-rings (K) found in kit bag.
2. Stretch o-rings (K) over one end of inner glass
(J). Position just slightly above bottom of glass
(see gure 3).
3. Install bulb (not included) into socket (H).
4. Place inner glass (J) over the bulb.
5. Slide inner glass (J) with o-ring into cup (I) until it
hits bottom of cup.
Note: Be sure o-rings slide into cup. It may be
necessary to rotate glass or push on o-ring to
allow them to slide into cup evenly.
6. Slide outer glass (L) over inner glass (J) until it
rests on xture (A).
Note: Outer glass (L) needs to slide between
brace (M) and holder (N). Holder (N) will apply
pressure on the glass to hold secure.
7. Restore electricity at main breaker.
(Figure 3)