Installation & Assembly

ManualsBrandsHubbardton Forge ManualsLightingHenry Outdoor Barn Light

MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING

CASTLETON, VERMONT USA | HUBBARDTONFORGE.COM

45372

ASSEMBLY & INSTALLATION INSTRUCTIONS

Henry Sconce W/ Glass Shade 302709 & 302714

B425

1 OF 4

302709

302714

(Shown in instructions)

Summary of content (4 pages)

PAGE 1
B425 ASSEMBLY & INSTALLATION INSTRUCTIONS Henry Sconce W/ Glass Shade 302709 & 302714 302709 (Shown in instructions) 302714 MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
PAGE 2
Henry Sconce W/ Glass Shade 302709 & 302714 B425 ASSEMBLY & INSTALLATION INSTRUCTIONS Component Parts A Fixture B Glass shade C Thumb Screw (4) D Barrel Nut (4) E Crossbar F Threaded Studs (2) G Ground Screw H Knurled Balls (2) I Gasket J Caulking Lip K Bulb (Not Included) MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
PAGE 3
B425 ASSEMBLY & INSTALLATION INSTRUCTIONS Henry Sconce W/ Glass Shade 302709 & 302714 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
PAGE 4
B425 ASSEMBLY & INSTALLATION INSTRUCTIONS Henry Sconce W/ Glass Shade 302709 & 302714 To Attach to Wall (Figures 2,3) 1. Thread studs (F) into the appropriate holes in the crossbar (E) to match the holes in the fixture (A). 2. Thread wires in electrical box through center hole in the crossbar (E) while moving crossbar into position. Using (2) #8 machine screws (not provided), attach crossbar (E) securely to the junction box. Note: A new electric box comes with screws.