A612 ASSEMBLY & INSTALLATION INSTRUCTIONS Fritz Pendant Lg 188902 44705 1 OF 5
A612 ASSEMBLY & INSTALLATION INSTRUCTIONS Fritz Pendant Lg 188902 Component Parts A Fixture B Crossbar C Ground Screw D Jam Nut E Canopy F Canopy Ring G Canopy Pipe Assembly H Fixture Coupling I Nipple J Fixture Pipe K Clutch L Set Screw M Plastic Sleeve N Socket O Thumb Screw (3) P Glass Q Fixture Cup 44705 2 OF 5
A612 ASSEMBLY & INSTALLATION INSTRUCTIONS Fritz Pendant Lg 188902 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A612 ASSEMBLY & INSTALLATION INSTRUCTIONS Fritz Pendant Lg 188902 14. Using suitable wire connectors (not provided) connect fixture wires to supply (white to white and black to black). Attach a pigtail lead to crossbar ground screw (C). Holding canopy (E) close to the ceiling connect all ground wires (bare copper or green to bare copper or green). Push wires back into electrical box. CAUTION: MAKE SURE WIRE CONNECTORS ARE TWISTED ON SECURELY AND NO BARE WIRE IS EXPOSED. B Machine Screws 15.
A612 ASSEMBLY & INSTALLATION INSTRUCTIONS Fritz Pendant Lg 188902 To Install Glass (Figure 3) 1. Install bulb (not included) into socket (N) . 2. Place glass (P) into fixture cup (Q). Note: It may be necessary to loosen thumb screws (O) to allow glass (P) to slide into cup (Q). They will not need to be removed completely. 3. Align top groove in glass (P) with thumb screws (O) and tighten thumb screws (O) evenly to secure glass (P). Q 4. Restore electricity at main breaker.
