A518 ASSEMBLY & INSTALLATION INSTRUCTIONS Cascade Pendant 139778 MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A518 ASSEMBLY & INSTALLATION INSTRUCTIONS Cascade Pendant 139778 Component Parts A Fixture B Mounting Bracket C #10 Screws (4) D Anchors (4) E Safety Cable F Safety Cable Nut G Ground Nut H Cupped Washer I Driver J Canopy K Gripper (4) L Hex Standoff (2) M Knob w/ Threaded Stud (2) N Supply/Support Cable (4) O Decorative Element P Acrylic MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A518 ASSEMBLY & INSTALLATION INSTRUCTIONS Cascade Pendant 139778 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A518 ASSEMBLY & INSTALLATION INSTRUCTIONS Cascade Pendant 139778 To Install Canopy, cont. - Figure 1 D I F L H C G B K E J (Figure 1) M continued MODERN AMERICAN BLACKSMITHS | FINE, HAND CRAFTED LIGHTING CASTLETON, VERMONT USA | HUBBARDTONFORGE.
A518 ASSEMBLY & INSTALLATION INSTRUCTIONS Cascade Pendant 139778 To Install Fixture - Figure 2 1. Locate the positive (+) and negative (-) labels on the top of the fixture (A). 2. Align the positive (+) and negative (-) labels on the fixture (A) with the positive (+) and negative (-) labels on the grippers (K). 3. Slide a gripper (K) lock, small hole end first, onto supply/support cable (N). Repeat for remaining cables (N). Locks are shipped in kit bag. 4.
A518 ASSEMBLY & INSTALLATION INSTRUCTIONS Cascade Pendant 139778 To Complete Assembly - (Figure 3) 1. Locate decorative element (O). Take note that one bar has a hole. 2. Place bar without a hole into the acrylic (P) in the fixture (A). Lower element (O) and rotate until bar with the hole passes through acrylic (P). See figure below for orientation of decorative element (O). 3. Decorative element (O) will rest in acrylic (P). 4. Restore electricity at main breaker.
