Installation Instruction

Assembly & Installation Instructions A365
Bento LED Pendant 138650D Page 6 of 6
Hand-Forged, Vermont-Made Lighting and Accessories
P.O. Box 827, 154 Route 30 South, Castleton, Vermont 05735 30852
Install Shade (Figure 13)
Component Parts
S Shade Assy
N Thumb Screw (6)
O Shade Bracket (6)
1. Remove Thumb screws (N) from
fixture and set aside. (Figure 13)
2. Loosely install one Shade Bracket
(O) (Figure 14).
3. Slip Shade assembly (S) in
between fixed bracket and Shade
Bracket (O)
4. Rotate Shade assembly into place
and install second Shade bracket
(O) opposite from the loosely
installed Shade Bracket (Figure
14)
5. Loosely tighten first and second
Shade Bracket (O).
6. Install the remainder of Shade
Brackets (O) loosely.
7. When all Shade Brackets (O) are
installed tighten each one while
pushing shade up against fixture.
8. Restore Electricity at main
breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 13)
(Figure 14)