A589 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Pendant 136420 42408 1 OF 4
A589 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Pendant 136420 Component Parts A Crossbar B Lock Nut C Nipple D Ground Screw E Canopy F Canopy Ring G Canopy Loop H Chain I Fixture Loop J Fixture K Socket (4) L Small Glass (2) M Large Glass (2) N Cup (4) O Thumb Screw (12) 42408 2 OF 4
A589 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Pendant 136420 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A589 ASSEMBLY & INSTALLATION INSTRUCTIONS Sprig Pendant 136420 To Install Glass (Figures 2 & 3) 1. Unpack both sizes of glass (L & M). 2. Install bulbs (not included) into sockets (K). See Figure 3 for placement of small & large glass. 3. Place glass (L/M) over the bulb. 4. Slide glass (L/M) into cup (N) until groove in glass lines up with thumb screws (O). Note: Thumb screws are shipped in cups. It may be necessary to loosen thumb screws so glass can pass into cup.
