A651 ASSEMBLY & INSTALLATION INSTRUCTIONS Gossamer Pendant 139654 45395 1 OF 5
A651 ASSEMBLY & INSTALLATION INSTRUCTIONS Gossamer Pendant 139654 Component Parts A Canopy B Mounting Bracket C #10 Wood Screws (8) D Supply/Support Cable (4) E Driver F Cupped Washer G #8 Nut H Barrel Knobs (2) I Standoff (2) J Threaded Stud (2) K Safety Cable L Safety Cable Nut M Fixture N Gripper (4) O Gripper Cover (4) P Accent 1 (1) Q Accent 2 (2) 45395 2 OF 5
A651 ASSEMBLY & INSTALLATION INSTRUCTIONS Gossamer Pendant 139654 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
A651 ASSEMBLY & INSTALLATION INSTRUCTIONS Gossamer Pendant 139654 To Install Fixture (continued) (Figure 2) 1. Align end of fixture (M) that has (+) and (-) labels with canopy (A) with (+) and (-) labels attached. 2. Unscrew gripper cover (O) from gripper (N). Slide gripper cover (O) over supply/support cable (D) with the small hole first. Insert cable (D) into gripper (N) until cable sticks through slot on side of gripper (N). 3. Repeat with remaining cables (D). 4.
A651 ASSEMBLY & INSTALLATION INSTRUCTIONS Gossamer Pendant 139654 To Install Accents (Figure 3,4) 1. Locate accent pieces (P+Q), fixture (M) will use two accent 2 (Q) and one accent 1 (P). 2. Install accents onto fixture (M). Note the location of the circle cutout on accent 2 (Q) to help orientation. 3. Once desired height of fixture (M) with accents installed is achieved, cut off excess supply/ support cable (D) as close to slot in gripper (N) as possible.
