Installation Sheet

Assembly & Installation Instructions B358
Small Henry Outdoor Sconce 302710 Page 4 of 4
36599 Rev A
Modern American Blacksmiths | Fine, Hand Crafted Lighting
Castleton, Vermont USA | HUBBARDTONFORGE.COM
6. Carefully tuck all wires behind the fixture (D)
and inside the crossbar (A).
7. Apply a generous bead of a suitable caulking
material (not provided) to calking lip (H) on
the fixture (Figure 2).
8. Align holes in fixture (D) with threaded studs
(B). Thread a knurled ball (E) onto each
threaded stud (B) and hand tighten to secure
fixture (D) to wall. Be sure threaded studs (B)
are fully seated in the knurled balls (E)
(Figure 1)
9. Install gasket (F) around top of bulb (G).
10. Screw bulb (G) into socket and press gasket
(F) up to touch fixture (D).
11. Restore Electricity at main breaker.
If you need further assistance, or find that you are missing any parts, please contact the dealer from which you purchased
this product. We hope you enjoy your fixture!
* Hubbardton Forge will not be liable for injury or damage caused by improper installation, lamping or use of this fixture.
(Figure 2)