Installation Sheet

ManualsBrandsHubbardton Forge Lighting ManualsOutdoor Wall SconcesHubbardton Forge Henry Single Light 11" Tall Outdoor Wall Sconce - High Wattage

Assembly & Installation Instructions B358

Small Henry Outdoor Sconce 302710 Page 1 of 4

36599 Rev A

Modern American Blacksmiths | Fine, Hand Crafted Lighting

Castleton, Vermont USA | HUBBARDTONFORGE.COM

Please Note: This fixture is designed to be mounted on a standard wall surface and may not be suitable for all

applications. If installing in a non-wood frame application, we recommend consulting a qualified builder or electrician.

Please Note: After installation, extra hardware and accessories may be left due to kits being used on multiple products.

CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL

INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician.

This product must be installed in accordance with applicable installation code(s), by a person familiar with the

construction and operation of the product and the hazards involved.*

Caution: Do not exceed maximum wattage noted on fixture. Use only recommended bulbs with fixture.

Summary of content (4 pages)

PAGE 1
Assembly & Installation Instructions Small Henry Outdoor Sconce 302710 B358 Page 1 of 4 CAUTION: FAILURE TO INSTALL THIS FIXTURE PROPERLY MAY RESULT IN SERIOUS PERSONAL INJURY OR DEATH AND PROPERTY DAMAGE. We recommend installation by a licensed electrician. This product must be installed in accordance with applicable installation code(s), by a person familiar with the construction and operation of the product and the hazards involved.* Caution: Do not exceed maximum wattage noted on fixture.
PAGE 2
Assembly & Installation Instructions Small Henry Outdoor Sconce 302710 B358 Page 2 of 4 Component Parts A Crossbar B Threaded Studs (2) C Ground Screw D Fixture E Knurled Balls (2) F Gasket G Bulb (Not Included) H Caulking Lip Modern American Blacksmiths | Fine, Hand Crafted Lighting Castleton, Vermont USA | HUBBARDTONFORGE.
PAGE 3
Assembly & Installation Instructions Small Henry Outdoor Sconce 302710 B358 Page 3 of 4 To Prepare & Install Fixture (Figure 1 & 2) Caution: Be sure power is off at the main breaker box prior to installation. 1. Carefully unpack the fixture from the carton. 2. Thread studs (B) into the appropriate holes in the crossbar (A) to match the holes in the fixture (D) 3. Thread the wires in the electrical box through the center hole in the crossbar (A) while moving the crossbar into position.
PAGE 4
B358 Assembly & Installation Instructions Small Henry Outdoor Sconce 302710 Page 4 of 4 6. Carefully tuck all wires behind the fixture (D) and inside the crossbar (A). 7. Apply a generous bead of a suitable caulking material (not provided) to calking lip (H) on the fixture (Figure 2). 8. Align holes in fixture (D) with threaded studs (B). Thread a knurled ball (E) onto each threaded stud (B) and hand tighten to secure fixture (D) to wall.