Please read the Installation Manual before you connect your SAFE to the security system. Safer, Smarter Communities Installation Manual Download the latest version of Installation Manual from www.safebyhub6.com We recommend unplugging your security system before you start installing SAFEbyHUB6.
Before you start, what’s in your box? SAFE comes with all the cables you need in the installation. In addition, you will need pliers or a screwdriver.
Know your passcode A passcode is required to disarm your system. Note that your hardware passcode is NOT your HUB6 app account password. Passcode: a four or six digit secret number to disarm your system. Please do not proceed if you don’t know your passcode. Contact us at support@hub6.io for help.
Things to consider before making a decision To ensure a stable connection, we recommend having sufficient signal for both WiFi and cellular at your chosen location. 1 Make sure you have sufficient signal for both WiFi and cellular. ! You might need to switch to a different location if your chosen location has limited Wifi or cellular signal. 2 3 You can use WiFi or a Ethernet cable to connect SAFE to your home internet. If you prefer using a Ethernet calble, make sure you have access to a LAN port.
SAFE installation locations Your SAFE should be connected either with (A)the keypad or (B)the control panel. Please choose the desired location to install your SAFE. A Keypad The keypads are usually located near your entrance doors. B Control Panel The control panel is usually located in the utility room.
A To install beside your keypad, please continue. If you would like to install SAFE beside control panel, please go to P14.
01 Locate your keypad The keypads are usually installed on the wall near your entrance doors. Honeywell Keypad DSC Keypad You might need to switch to a different location if your chosen location has limited Wifi or cellular signal.
02 Locate the cables Open up the keypad cover to access the panel with color-coded wires. You will see different terminal codes depending on which system you have.
03 Choose a connection method. To connect your SAFE to the keypad, use either a (A) T-clip cable or (B)stripped cable. You will need pliers to secure T-clips or a screwdriver for stripped cable.
03-A 1 For DSC system: Use (A)T-clip cable Identify and match colored SAFE wires to terminal codes on the keypad. Connect green wire to [GRN], yellow wire to [YEL], black wire to [BLK] and red wire to [RED]. GRN YEL BLK RED 2 9 Secure all 4 clips with pliers. Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
For Honeywell system: Use (A)T-clip cable Identify and match colored SAFE wires to terminal codes on the keypad. 1 Connect green wire to [ G], yellow wire to [ Y], black wire to [-] and red wire to [+]. G 2 + - Y Secure all four clips with pliers. Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
03-B For DSC system: Use (B)Stripped cable Identify and match colored SAFE wires to terminal codes on the keypad. 1 Unscrew screws and connect green wire to [GRN], yellow wire to [YEL], black wire to [BLK] and red wire to [RED]. 2 Tighten up all four screws with a screwdriver. GRN YEL BLK RED 11 Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
For Honeywell system: Use (B)Stripped cable Identify and match colored SAFE wires to terminal codes on the keypad. 1 Unscrew screws and connect green wire to [ G], yellow wire to [ Y], black wire to [-] and red wire to [+]. 2 Tighten up all four screws with a screwdriver. Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
04 1 Download HUB6 app SAFE is now successfully connected to the security system. You may plug in your alarm system now. Please download HUB6 app and follow instructions. Red light indicates a successful connection. 3G 2 13 Download HUB6 app and follow instructions.
14
B To install beside your control panel, please continue. If you would like to install SAFE beside a keypad, please go to P14.
01 Locate your control panel The control panel is usually installed in the utility room. Honeywell/DSC Control Panel You might need to switch to a different location if your chosen location has limited Wifi or cellular signal.
02 Locate the cables Open up the cover to access the panel. You will see different terminal codes depending on your system.
03 Choose a connection method To connect your SAFE to the control panel, use either a (A)T-clip cable or (B)stripped cable. You will need pliers to secure T-clips or a screwdriver for stripped cable.
03-A 1 Identify and match colored SAFE wires to terminal codes on the control panel. Follow the chart to clip SAFE colored wires to matching control panel wires.
2 Secure all four clips with pliers. Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
03-A 1 Identify and match colored SAFE wires to terminal codes on the control panel. Follow the chart to clip SAFE colored wires to matching control panel wires.
2 Secure all four clips with pliers. Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
03-B 1 SAFE Colored Wire G Y R B DSC PC1555 GRN YEL Aux + Aux - other DSC GRN YEL RED BLK Secure all four screws with a screwdriver. RED 23 Identify and match colored SAFE wires to color codes on the control panel. Unscrew screws and follow the chart to connect your SAFE. System Model 2 For DSC system: Use (B)Stripped cable BLK YEL GRN Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
For Honeywell system: Use (B)Stripped cable Identify and match colored SAFE wires to color codes on the control panel. 1 Unscrew screws and follow the chart to connect your SAFE. System Model SAFE Colored Wire Honeywell 21 IP 2 G Y R B GREEN YELL AUX GND 6 7 5 4 other Honeywell Secure all four screws with a screwdriver. 4 5 6 7 Colors of the keypad wires might not be accurate. Please connect SAFE wires to matching terminal codes.
04 1 Download HUB6 app SAFE is now successfully connected to the security system. You may plug in your alarm system now. Please download HUB6 app and follow instructions. Red light indicates a successful connection. 3G 2 25 Download HUB6 app and follow instructions.
FCC Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
ISED Regulatory Compliance This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions: 1. This device may not cause interference. 2. This device must accept any interference, including interference that may cause undesired operation of the device.
RF Exposure Compliance Statement This equipment complies with FCC/IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. Cet équipement est conforme aux limites d’exposition aux radiations FCC/IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec une distance minimale de 20 cm entre le radiateur et votre corps.
HUB6 Limited Warranty Warranty Coverage HUB6 Inc. (“HUB6”) warrants the enclosed product (“Product”) to be free of all defects in material and workmanship for a period of one (1) year from the date of shipment of Product by HUB6 (“Warranty Period”). During the Warranty Period, HUB6 will repair or replace, at HUB6’s own discretion, at no charge, the Product or parts of the Product that prove defective because of improper material or workmanship under normal use and maintenance.
HUB6 Limited Warranty This limited warranty does not cover any failure or damage caused by loss or theft, improper use, careless use or accidental damage to the Product. This limited warranty does not cover failure or damage caused by natural disasters or acts of terrorism. This limited warranty does not cover water or fire damage to the Product. How to Obtain Services To obtain the benefit of this limited warranty, the customer must fill out a customer support request form at safebyhub6.
Invite your neighbours today, and build a connected community. Contact us +1 833-666-5166 support@hub6.io www.safebyhub6.
