Quick Start Guide

ManualsBrandsHUAWEI ManualsElectronicsSmart Band

1. Charging

Insert the protruding part of the charging cradle into the positioning hole of the band strap, then fasten the

buckle. The battery level will be displayed on the screen.

•

Wipe the charging port dry before charging.

•

Use the dedicated charging cable that comes with your band to charge it.

•

The band automatically powers on after being charged. To power off your band, swipe the screen and go to

Power off

Heart rate sensor

Touch-sensitive

button

Screen

Charging port

2. Downloading Huawei Health

To download and install the Huawei Health app, search for Huawei Health in the Google Play Store or

Apple App Store.

3. Pairing your band with your phone

4. Getting help

From the device list in the Huawei Health app, select the band and follow the onscreen instructions to

complete the pairing.

View the online help in the Huawei Health app for more information about connection and functions, as

well as usage tips.

Band slot

Quick Start Guide

Summary of content (7 pages)

PAGE 1
Quick Start Guide 1. Charging Insert the protruding part of the charging cradle into the positioning hole of the band strap, then fasten the buckle. The battery level will be displayed on the screen. Heart rate sensor Charging port Band slot Screen Touch-sensitive button • Wipe the charging port dry before charging. • Use the dedicated charging cable that comes with your band to charge it. • The band automatically powers on after being charged.
PAGE 2
Copyright © Huawei Technologies Co., Ltd. 2019. All rights reserved. THIS DOCUMENT IS FOR INFORMATION PURPOSE ONLY, AND DOES NOT CONSTITUTE ANY KIND OF WARRANTIES. Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Huawei Technologies Co., Ltd. is under license.
PAGE 3
• To prevent damage to your device's parts or internal circuits, do not use it in dusty, smoky, damp or dirty environments or near magnetic fields. • Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire. • Dispose of this device, the battery, and accessories according to local regulations.
PAGE 4
Reduction of hazardous substances This device and any electrical accessories are compliant with local applicable rules on the restriction of the use of certain hazardous substances in electrical and electronic equipment, such as EU REACH, RoHS and Batteries (where included) regulations, etc. For declarations of conformity about REACH and RoHS, please visit our web site http://consumer.huawei.com/certification.
PAGE 5
The product software version is TER-B09: 1.0.0.11 Software updates will be released by the manufacturer to fix bugs or enhance functions after the product has been released. All software versions released by the manufacturer have been verified and are still compliant with the related rules. All RF parameters (for example, frequency range and output power) are not accessible to the user, and cannot be changed by the user.
PAGE 6
RF exposure guidelines require that the device should be used for wrist worn only. Failure to observe this guideline may result in RF exposure exceeding limits. IC Statement The device meets the exemption from the routine evaluation limits in section 2.5 of RSS 102 and compliance with RSS-102 RF exposure, users can obtain Canadian information on RF exposure and compliance. This device complies with CAN ICES-3 (B)/NMB-3(B). This device complies with Industry Canada licence-exempt RSS standard(s).
PAGE 7
installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.