user manual
Table Of Contents
- 1 Getting to Know Your Device
- 2 Computer Requirements
- 3 Installation
- 4 Powering the Device On or Off
- 5 Registering the Handset
- 6 Setting Up a Wireless Connection
- 7 Accessing the Internet
- 8 Logging In to the Web Management Page
- 9 Using the Handset
- 10 Restoring Factory Defaults
- 11 FAQs
- The device does not work properly. What can I do?
- The handset will not power on. What can I do?
- No information is displayed on the handset screen. Why?
- The battery cannot be charged. What can I do?
- The handset continuously searches for the router. What can I do?
- The signal strength is weak. What can I do?
- The call volume is too high or too low. What can I do?
- 12 Safety Information
16
9.4 Settings Configuration
To configure and customize your handset settings, select Menu > Settings.
Configuring Date and Time
To set the date, select Settings > Date and time > Date, enter current date
by pressing the number key.
To set the time, select Settings > Date and time > Time, enter current time
by pressing the number key.
Configuring the Handset Lock
To set the handset lock, select Settings > Handset > Security > Phone
password. You can change the default handset lock code (0000) to a
personal password.
Before restoring factory settings, you must enter the correct
handset lock code.
Locking or Unlocking the Keypad
In standby mode, press and hold the # key to lock the keypad.
In standby mode, press the left function key and then the * key to unlock the
keypad.
Entering the PIN and PUK
A Personal Identification Number (PIN) protects your SIM card from
unauthorized use. A PIN Unblocking Key (PUK) is used to change a
blocked PIN. If you enter your PIN incorrectly a number of times
consecutively, your SIM card will be locked and the handset asks you to
enter the PUK to unlock it. Both the PIN and the PUK are supplied with the
SIM card. For details, contact your service provider.