user manual
Table Of Contents
- 1 Getting to Know Your Device
- 2 Computer Requirements
- 3 Installation
- 4 Powering the Device On or Off
- 5 Registering the Handset
- 6 Setting Up a Wireless Connection
- 7 Accessing the Internet
- 8 Logging In to the Web Management Page
- 9 Using the Handset
- 10 Restoring Factory Defaults
- 11 FAQs
- The device does not work properly. What can I do?
- The handset will not power on. What can I do?
- No information is displayed on the handset screen. Why?
- The battery cannot be charged. What can I do?
- The handset continuously searches for the router. What can I do?
- The signal strength is weak. What can I do?
- The call volume is too high or too low. What can I do?
- 12 Safety Information
13
8 Logging In to the Web
Management Page
You can configure and manage the router settings using the web
management page. For details, see the help information on the web
management page.
1. Launch a web browser, and enter http://192.168.1.1 in the address bar.
2. Enter the password, and log in to the web management page. The
default password is admin.
To protect your router, only one user can log in to the web
management page at a time.
To protect your account, change the password promptly. For
details, see the help information on the web management
page.
9 Using the Handset
9.1 Call Functions
Making a Call
1. In standby mode, enter a phone number.
2. Press to place a call.
3. Press to cancel or end the call.
In standby mode, press to view the dialed call log. Find
the desired number, and then press to place a call to that
number.
Find the desired number in contacts, and then press to
call the number.
Answering or Rejecting a Call
When there is an incoming call, press to answer the call or to
reject the call.