HUAWEI F685 Fixed Wireless Terminal USER GUIDE
Copyright © Huawei Technologies Co., Ltd. 2011. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. The product described in this manual may include copyrighted software of Huawei Technologies Co., Ltd and possible licensors.
Appearance Note: The figures in this guide are provided for your reference only. Front View Handset No. Base Item Description Navigation keys 1 2 3 4 Left function key Speaker key Call/Send key Access the main menu by pressing the OK key in standby mode. Access a shortcut menu by pressing the corresponding navigation key in standby mode. Adjust the volume by pressing the navigation keys during a call. Select the option displayed in the lower left corner of the screen.
No. Item 8 Number and symbol keys Description 9 End key Enter numbers, letters, and symbols. Number keys (2–9): Speed-dial a user-assigned phone number by pressing and holding a key in standby mode. # key: Switch between text input methods in editing mode. * key: Display the symbol list in editing mode. End or reject a call. Press and hold this key to power a handset on or off. Return to the standby mode.
Screen Icons Icon Indicates… Icon Indicates… Signal strength Battery level Alarm clock Silent mode Unread message Handset connected to the base Forwarding of all calls enabled Installation Installing the SIM Card Ensure that the base is powered off and disconnected from the power adapter. When installing the SIM card, ensure that the golden contacts of the SIM card are facing downward and that the beveled edge of the SIM card is properly aligned with that of the SIM card slot.
Handset: Note: If the phone will not be used for a long time, remove the battery from the phone. Connecting the Power Adapter to the Base Note: When new phones are delivered, the battery power is low. Therefore, charge the phone for a while and then power on the phone the first time you use it. Powering On the Phone Powering the Base On To power the base on, press and hold the power key. Note: The base will power on automatically after the power adapter is connected to it.
Connecting a Handset to the Base Registering a Handset Register a handset with the base before using it. Otherwise, you cannot use the handset. To register a handset, do the following: 1. Press and hold the page/register key on the base until the power indicator blinks fast. 2. On the handset, select Settings > Handset > Register handset. 3. Select the base to be connected, and then enter the registration password. 4. Press the OK key to register the handset with the base.
4. Press the end key to cancel or end the call. Transferring a Call To transfer an ongoing call that is from the outside line to another handset, do the following: 1. Press the intercommunication key to scroll to the handset to which you want to transfer the call. 2. Press the call key to connect to the desired handset. 3. Press the end key to end the call between the current and desired handsets. The call is transferred to the desired handset. Messages Creating a Message 1.
Traditional English Input ("ABC" or "abc") In "ABC" or "abc" text input mode, press the number keys to enter letters. Press a number key repeatedly until the desired character appears. If the next letter you want to enter is on the same key as the current one, wait until the current letter is entered, and then enter the next one. Number Input In "123" input mode, enter a desired number by pressing the number key. Configuring Settings To configure and customize your phone settings, select Menu > Settings.
Signal Strength Is Weak 1. Check that the SIM card is installed properly. 2. Place the phone at a location where strong signals can be received. Call Volume Is Too High or Too Low During a call, press navigation keys to adjust the volume. Warnings and Precautions This section contains important information pertaining to the operating instructions of your device. It also contains information about how to use the device safely. Read this information carefully before using your device.
On a stormy day with thunder, do not use your device, to prevent any danger caused by lightning. When you are on a call, do not touch the antenna. Touching the antenna affects the call quality and results in increase in power consumption. As a result, the talk time and the standby time are reduced. Use accessories authorized by the manufacturer. Using unauthorized accessories will render the warranty null and void.
Cleaning and Maintenance The device, battery, and charger are not water-resistant. Keep them dry. Protect the device, battery, and charger from water or vapor. Do not touch the device or the charger with a wet hand. Otherwise, it may lead to a short circuit, a malfunction of the device, and an electric shock to the user. Do not place your device, battery, and charger in places where they can get damaged because of collision.
EU Regulatory Conformance Hereby, Huawei Technologies Co., Ltd. declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. For the declaration of conformity, visit the Web site www.huaweidevice.com/certification. Notice: Observe the national local regulations in the location where the device is to be used. This device may be restricted for use in some or all member states of the European Union (EU).
