User manual

Table Of Contents
2 On your device, enter the Huawei Share settings screen, and enable Huawei Share and
Computer share.
3 Record the Name shown on computers and the user name and password under
Verication on computers.
4 On your computer, go to:
Windows: Computer > Network
mac OS (mac OS 10.8 or later): Finder > Go to > Network
5 On your computer, double-click the name of your device, and enter the user name and
password recorded earlier.
6 Open a folder of your device such as the Internal storage folder, then view, edit, or copy
les from the folder to the computer, or copy les from the computer to this folder to
store them in your device.
You can also edit the les in this folder on your computer, and the changes will be synced
to your device automatically. Similarly, if you edit any les on your device, the changes
will be synced to your computer as well.
One-Touch Printing with Huawei Share
When a printer that supports Huawei Share is nearby, you can use Huawei Share to nd the
printer and print out pictures or PDF les from your device.
1 Depending on the type of printer, ensure the following:
Wi-Fi capable printers: The printer must be powered on and connected to the same
network as your device.
Wi-Fi Direct capable printers: The printer must be powered on and have Wi-Fi Direct
enabled.
Bluetooth capable printers: The printer must be powered on and discoverable.
2 On your device, preview the le to be printed, then go to Share > Huawei Share.
3 Once the printer has been discovered, touch its name on your device, and adjust settings
on the preview screen. Then touch PRINT to print.
If you are connecting a Bluetooth printer to your device for the rst time, nd the printer
on your device, touch the printer name, then press and hold the Power button on the
printer for about 1 second to conrm the connection.
For a list of supported printers, touch Learn more on the Huawei Share sharing screen,
swipe left on the screen, then touch What printers are supported? to see the list.
Connect to a Laptop Using a USB Cable
Select USB Connection Mode
1 Use a USB cable to connect your device to the computer.
2 Swipe down from the status bar to open the notication panel, then go to Settings >
Touch for more options and select one of the following modes:
Settings
68