User Manual

Leo Proudcts Online Help

11 Maintenance

Issue 02 (2018-03-12)

Huawei Proprietary and Confidential

Method 6: Disable the Tilt-to-wake setting.Go to Settings > Gestures,and disable

Tilt-to-wake.

Method 7: Enable Watch mode.Press the power button and then enable Watch mode in the

Battery app.

Method 8: If Cellular on the 4G version of the watch is set to ON (the default value is

Automatic), power consumption increases. It is recommended that this setting be set to

Automatic.Set the Cellular to Automatic by going to Settings > Connectivity > Cellular.



Your watch's battery capacity, functions, and usage will all affect your watch's battery life.



Third-party apps can enhance the functionality of the watch, but some third-party apps also increase

power consumption. Take care when downloading and installing third-party apps.



When Smart power saving mode is enabled, the watch will disable the Always-on screen function,

the mobile network will switch to automatic mode, and the screen brightness will be lowered.



Your watch will not receive notifications from apps whose notifications are blocked.



In Airplane mode, Bluetooth and network connection are disconnected. You will not be able to make

or receive calls, send or receive messages, or use any online functions.



Watch mode keeps only the basic Clock and Pedometer functions, prolonging the watch's standby

time.

11.2 Adjusting and changing your strap

Adjust your strap based on your wrist size. To change your strap, see the following

instructions.

Gently pull the strap to make sure you have properly fastened it.

You can change your watch strap with another HUAWEI WATCH 2 watch strap of the same

size. Do not use unauthorized metallic straps or other types of watch strap, as they may cause

the watch to function incorrectly (such as affecting the communication, GPS, Bluetooth,

Wi-Fi, heart rate or waterproof functions).

Removing your strap

Fastening your strap