Operation Manual

16
Connecting to the Internet
Using an LTE, 3G, or 2G Network
By default, the Mobile WiFi's management parameters have been preset according to your
operator's requirements. The Mobile WiFi will be connected to the Internet after its startup.
If data is transmitted, the Mobile WiFi will automatically connect to the Internet. If data is not
transmitted for a period of time, the Mobile WiFi will automatically disconnect from the
network connection.
Note:
You can use the menu screen or log in to the web management page to enable or disable
the automatic dialing while roaming function. If this function is turned off, when the
Mobile WiFi enters a roaming network, it will automatically disconnect from the Internet
connection that has already been established. You will need to manually establish this
network connection again.