User Guide Welcome to HUAWEI
Introduction Thank you for choosing the HUAWEI Ascend P1XL (HUAWEI U9200E) smartphone. Be sure to carefully read the function descriptions, operating instructions, and safety precautions described in this document before using your phone. All pictures and illustrations in this document are for your reference only. The actual appearance and display features will depend on the specific phone purchased. Please visit www.huaweidevice.
Installation • Press and hold to power on your phone. • Press and hold to display the options menu, from where you can power off the phone and perform some shortcut operations. Keys and Functions Charger jack/USB port Headset jack Earpiece SIM card slot Secondary camera Status indicator Power key microSD card slot Main camera Noise reduction microphone Volume keys Flash unit • Press to lock the screen when your phone is active. • Press and hold for over 10 seconds to forcibly power off the phone.
• Touch to return to the Home screen. • Touch and hold to view the list of recently used applications. Installing a SIM Card Install a SIM card as shown in the following diagram. Standard USIM card dimension: 25 mm x 15 mm x 0.76 mm (DxWxH) When installing the SIM card, push the card into the slot until it clicks into place.
Installing and Removing a microSD Card Your phone's memory capacity can be expanded by installing a microSD card. For installation instructions, refer to the following diagram. When installing the microSD card, push the card into the slot until it clicks into place. To remove the microSD card: 1. On the Home screen, touch ! 6HWWLQJV. 2. Touch 6WRUDJH ! 8QPRXQW 6' FDUG.
3. Remove the microSD card by gentling pushing it inwards then releasing; the card will automatically pop out from the slot. Charging the Battery Your mobile phone has an internal rechargeable battery. Do not attempt to open the battery cover and replace the battery by yourself. To replace the battery, contact Huawei or an authorized service provider. 1. Connect your charger to the USB cable provided. 2. Connect the charger to a power outlet. 3. Connect the phone to the USB cable.
• Steady green: The phone is charging and the battery level is high or full. • Steady yellow: The phone is charging and the battery level is higher than 10%. • Steady red: The phone is charging and the battery level is low. • Blinking red: The battery level is low and the phone needs to be charged. If your phone is powered on, the charging icon is displayed in the notification bar while the battery is charging. When the icon changes to , the battery is fully charged.
• If your phone is very low on power, it displays a message. If your phone is extremely low on power, it will power off automatically. and touch functions. , , or to disable these respective Battery Saving Tips • Touch 'LVSOD\ ! %ULJKWQHVV to lower the screen brightness, and touch 6OHHS to shorten the period until the screen locks. Try the following actions to reduce power consumption: • Close applications that are no longer in use. • When you do not need 3G services, select the 8VH RQO\ * QHWZRU
Getting Started Enabling Fast Boot 1. On the Home screen, touch Powering Your Phone On or Off • When your phone is off, press and hold to power it on. If your SIM card is protected by a PIN, you must enter it to use the phone. to display the options • When your phone is on, press and hold menu. Touch Power off. If Fast boot is enabled, your phone enters deep sleep mode. If Fast boot is disabled, touch OK to power your phone off when prompted. Press and hold the phone.
• Create or log in to your personal account. • Customize your phone settings. Creating a Google Account Availability of Google applications, services, and features may vary according to your country or carrier. Please follow local laws and regulations to use them. If you do not already have a Google account, you can create one as follows: 1. On the 0DNH LW *RRJOH screen, touch *HW DQ DFFRXQW. 2. Enter the first name and last name you want to use for your account, and then touch 1H[W.
6. When the )LQLVK FUHDWLQJ DFFRXQW screen appears, select the (QDEOH ZHE KLVWRU\ check box, and then touch , DFFHSW. 7. Enter the characters that appear on the screen, and then touch 1H[W. 8. When the (QDEOH SXUFKDVHV screen appears, touch 6NLS, or enter the purchase information, and then touch 6DYH. 9. When the %DFNXS screen appears, select the .HHS WKLV SKRQH EDFNHG XS ZLWK P\ *RRJOH $FFRXQW check box, and then touch 1H[W. 10.
Wireless devices may interfere with an airplane's flight system. Power off your phone or switch to Airplane mode where wireless devices are not allowed according to airline regulations. Touch and hold: Touch and hold on the current screen or the input field to display the options menu. Using the Touchscreen Touch: Tap the screen once with your finger to select an item or open an application. 11 Flick: Move your finger either vertically or horizontally across the screen.
Unlocking the Screen Drag: Touch and hold an item, and then drag it to the desired location on the screen. For example, on the Home screen, you can move an icon by dragging it to another location or remove an icon by dragging it to the trash can. 1. If the screen is off, press 2. Follow the onscreen instructions and drag until it reaches Locking and Unlocking the Screen Locking the Screen • To lock the screen when the phone is active, press .
• To open certain applications quickly, drag the icon over the corresponding icons. Face Unlock You can set your phone to unlock by recognizing your face. To enable and configure the settings of the )DFH 8QORFN application: 1. On the Home screen, touch 6FUHHQ ORFN ! )DFH 8QORFN. ! 6HWWLQJV ! 6HFXULW\ ! 2. Read the onscreen instructions, and then touch 6HW LW XS ! &RQWLQXH to take a photo. • When the screen is locked, flick to the left or right in the clock area to switch to Music+ controller. 13 3.
4. Choose an unlock method, and configure the unlock settings. If face identification fails, unlock the phone using the alternative method you have selected. 1 5. Touch 2.. To unlock your phone using the )DFH 8QORFN function, bring your face to the center of the screen. Your phone will identify your face and unlock. Home Screen Your phone is preloaded with multiple themes. The screen layout varies depending on the theme. The default theme is used as an example in this section.
Notification and Status Icons 1 Notification bar: Displays notifications and status icons. Flick the notification bar downwards to open the notification panel. 2 Display area: The main display area of your phone. 3 Menu key: Touch to open the application list. 4 Shortcuts: Touch to open the corresponding applications. To move an application or widget, touch and hold its icon, and then drag the icon to the target location. To remove an item, drag it to the trash can.
5 Roaming Airplane mode Call in progress Missed calls Bluetooth on Receiving location data from GPS Call in progress using a Bluetooth headset New mail in your Gmail account Speaker activated Alarm enabled New message Message not sent Vibration mode Silence mode New chat message New email New voicemail Connected to a PC talk 16 Call muted Charging Battery full Battery extremely low
Open Wi-Fi network available Uploading Phone memory full Preparing the microSD card 17 Upcoming event Downloading • Storage location can be changed • Sign-in or synchronization problem More undisplayed notifications Synchronizing data Synchronizatio n failed Portable Wi-Fi hotspot activated USB tethering Connected to a VPN Disconnected from a VPN Headset plugged in SIM card not found Select input method - -
Switching Between the Home Screen and Its Extensions Flick left or right across the screen to switch between the Home screen and its extensions. Changing the Theme • To select a theme, on the Home screen, touch VHWWLQJV. • Alternatively, you can touch Home theme. ! 7KHPH ! ' +RPH to switch to 3D Changing the Wallpaper 1. On the Home screen, touch ! :DOOSDSHU. 2.
and select a source from the displayed options menu to set the wallpaper. • Quickly open or close an application. • Flick left or right on a notification to delete it. Using Auto-rotate Screen • Touch X to delete all notifications. If your rotate your phone when browsing a web page, viewing an image, or composing a message, the orientation of your screen will change to landscape or portrait view automatically.
Accessing Applications and Widgets Managing Shortcuts and Widgets To access the application list, on the Home screen, touch From the application list, you can: • To add a shortcut icon or widget: From the application list, touch and hold an application icon, and then drag it to the Home screen. From the widget list, touch and hold a widget, and then drag it to the Home screen. . • Touch an icon to open an application. • Flick left or right across the screen to switch between application lists.
the shortcut bar, and then drag it to the shortcut bar at the bottom of the screen. If there is no available space, a folder will be created for the overlapped icons. Managing Folders on the Home Screen • To create a folder: Drag an application icon onto another application icon to create a new folder that contains both icons. • To rename a folder: On the Home screen, touch a folder, and then touch the folder name field beneath it.
Calling Be careful not to block the microphone or the speaker to avoid affecting the call quality. To make a call, you can manually enter phone numbers on the dialer, touch a number in your contacts list or call log, or use voice control. During a call, you can choose to keep the current call on hold to answer an incoming call, forward the incoming call to your voicemail, or start a conference call. To open 3KRQH, touch ! 3KRQH. 3. Touch 22 to make a call. 1.
Background noise will affect the accuracy of voice dialing. 1. On the Home screen, touch ! 9RLFH 'LDOHU. 2. Follow the onscreen instructions, then say your command close to the microphone. Your phone will identify the command and make a call. Answering or Rejecting a Call When a call comes in, you can: • Answer the call: Drag 23 to the right. • Reject the call: Drag to the left.
• Reject the call and send a text message to the caller: Drag On the Phone screen, touch > Settings > Quick responses to edit the message that will be sent. upwards. Operations During a Call During an active call, you can touch any of the following buttons: • 24 : Ends the call.
• : Opens the dialer for you to enter another number. Making a Conference Call • : Activates the speakers. • : Mutes your microphone. Conference calls allow conversations between more than two people at a time. • • : Places the current call on hold. This function is network dependent. To use this service, contact your network operator. : Displays your contacts list for you to select a contact to add to the current call. This function is network dependent.
4. To end the conference call, touch . Switching Between Calls To use this service, subscribe to your operators's call switching function. For details, contact your network operator. Forwarding a Call Your phone can be set up to forward incoming calls to a new number. 1. On the 3KRQH screen, touch IRUZDUGLQJ. ! 6HWWLQJV ! &DOO If you receive an incoming call while you are already busy on a call, you can answer the new call and place the current one on hold. Touch to switch between the two calls. 2.
1. On the 3KRQH screen, touch VHWWLQJV. ! 6HWWLQJV ! $GGLWLRQDO 2. Select &DOO ZDLWLQJ to enable the function. Using the Voicemail Service The voicemail function enables your phone to forward unanswered calls to your voicemail inbox, including unanswered calls when you are busy on other calls and calls received when your phone is powered off. Contact your network operator to subscribe to the voicemail function and obtain your voicemail number.
Contacts 5. If you have more than one account on your phone, touch the account to which you want to import the contacts. 3HRSOH enables you to save and manage contacts on your phone, including such details as your contacts' phone numbers and addresses. Creating a Contact On the Home screen, touch ! 3HRSOH to open 3HRSOH. Importing Contacts from a SIM Card 1. In the contacts list, touch ! 0DQDJH FRQWDFWV. 2. Touch &RS\ IURP 6,0 FDUG. 3.
Communicating with a Contact Quickly Searching for a Contact In the contacts list, touch the contact's picture or picture frame (if no picture is assigned to the contact) and touch one of the displayed icons to select the method you want to use to communicate with the contact, for example, placing a call, or sending a text message or an email. The available icons depend on the information you have saved for the contact, the applications on your phone, and your accounts. 2.
Deleting a Contact 5. Touch '21( to save the contact group. 1. In the contacts list, select the contact you want to delete, and Editing a Contact Group ! 'HOHWH. then touch You can change a contact group at any time. To update the information or members: 2. Touch 2.. Managing Contact Groups Creating a Contact Group 1. In the contacts list, touch 2. Touch to display the groups list. . 3. Enter the group name. 4. Touch $GG PHPEHUV, select one or more contacts, then touch $'' 0(0%(56. 30 1.
Adding a Contact to a Group Select a group, touch to select the desired contact, and then touch $'' 0(0%(56. Joining Contacts To avoid duplicate contacts in your list, join two or more contacts together to form a single contact. Note that contacts stored in the SIM card cannot be joined. 1. From the contacts list, touch a contact you want to join. 2. Touch 0DQDJH MRLQHG FRQWDFWV ! $GG FRQWDFW, and then select another contact to combine with the first contact selected.
2. From the displayed options menu, choose ([SRUW WR VWRUDJH. A message is displayed showing the storage location to which the .vcf file of your contacts will be exported. 3. Touch 2. to export your phone's contacts to the storage device. By default, the file exported will be saved in the root directory of your phone's memory. To change the default storage location, go to 6HWWLQJV ! 6WRUDJH ! 'HIDXOW VWRUDJH ORFDWLRQ. You can copy the .
Text Input 2. Touch 6HOHFW LQSXW PHWKRG to select a desired input method. The keyboard layout may vary slightly depending on the input method. Figures in this section are provided for your reference only. Using the Onscreen Keyboard Text can be entered using the onscreen keyboard. To open the onscreen keyboard, touch a text field. To hide the onscreen keyboard, touch . Switching Between Text Input Methods 1. When the keyboard is displayed, open the notification panel.
1 3 In English input mode, touch to change the input language. 4 In English input mode, touch to switch to the numbers and symbols keyboard. 2 3 1 4 Using the Android Keyboard When the text entry method is for lower-case letters, touch to capitalize the next letter you enter, or touch and hold to capitalize all letters you enter. 1 2 In English input mode, touch to switch to the emoticon keyboard.
• Touch to delete the character to the left of the cursor. On the Home screen, touch 1 • Touch and hold to delete all the characters to the left of the cursor. 2 to the right of Android keyboard to display input. Touch the Android keyboard settings screen. Touch Voice input key to set whether the voice input key appears on the Android keyboard. You can enable or disable the voice input function by selecting or deselecting Google voice typing in the Settings > Language & input section.
• : Cut the selected content. Touch and hold the text. Drag the grab points to select the text you want to cut. Then touch this button to cut the selected text. After the text is cut, touch a blank area in the text field to display . Move you want to paste the text. Touch to select where : Copy the selected text. Touch and hold the text. Drag the grab points to select text you want to copy. Touch this button to copy the text.
Messaging On the Home screen, touch message application. Adding a Slideshow To attach more than one file to your message: ! 0HVVDJLQJ to open the 3. When editing the slideshow, you can: . • Touch 3UHYLHZ to view the slides you have composed. 2. Enter the recipient's phone number and compose the message. To attach a photo or an audio file, touch 3. When the message is ready to be sent, touch the message. . • Touch $GG SLFWXUH to add an image. • Touch 5HPRYH VOLGH to remove slide.
4. Touch 'RQH to finish composing your slideshow and return to the multimedia message screen. To replace an image, touch Replace on the slide editing screen. 5. When the message is ready to be sent, touch 6HQG. Replying to a Message 1. From the messages list, select the message you want to reply to. 2. Compose your reply, and touch to send the message. Searching for a Message To find a message quickly: On the messages list screen, touch and enter the message content to search for.
Using Talk Accepting an Invitation 7DON is Google's instant messaging service. You can use it to communicate in real time with other people using 7DON on a phone or on the Internet. 1. If you have invited someone to chat or if someone has invited you to chat, the invitation message is displayed in the recipient's or your friends list. Opening Talk 2. To accept an invitation, touch a pending invitation, and then touch $FFHSW. To open Talk, on the Home screen, touch ! 7DON.
Setting Notifications for New Instant Messages When you receive an instant message, your phone can play a ringtone, vibrate, or display a notification icon. 1. On the accounts screen, touch 2. Select your account. ! 6HWWLQJV. 3. In the CHAT NOTIFICATIONS section, select one of the following: • IM notifications: Select the check box to display a notification icon on the notification bar when you receive an instant message. • Notification ringtone: Touch to select a ringtone for new instant messages.
Data Connection Turning On Mobile Data Services 1. On the Home screen, touch ! 6HWWLQJV. services while roaming may incur additional charges. Contact your network operator for details about data roaming charges. • Access point settings have been configured on your phone. Note that changing these settings may prevent you from accessing the Internet. Using Wi-Fi 2. In the :,5(/(66 1(7:25.6 section, touch 0RUH ! 0RELOH QHWZRUNV. Your phone can connect to a Wi-Fi network to access the Internet. 3.
4. Select the desired Wi-Fi network. If you select a secured network, enter the password when prompted. • If Wi-Fi and mobile network are both enabled, your phone connects to the Wi-Fi network preferentially and switches to the mobile network when Wi-Fi is unavailable. • To add a new Wi-Fi hotspot Service Set Identifier (SSID), on the Wi-Fi settings screen touch ADD NETWORK. • Obstacles such as walls may block Wi-Fi signals and reduce the signal strength.
2. In the displayed dialog box, select the 6KRZ DGYDQFHG RSWLRQV check box. In the :36 section, touch 2II, and then select 3,1 IURP DFFHVV SRLQW ! &RQQHFW from the displayed options menu. The selected Wi-Fi access point will received a PIN. 3. Enter the PIN to your phone, and touch then &RQQHFW. Your phone will display a message when it connects to the network. You also can select PIN from this device to connect to a Wi-Fi hotspot.
• You cannot share your phone’s data connection via USB tethering and access its microSD card as a mass storage device at the same time. • Using USB tethering will incur data traffic charges. For details, contact your network operator. 1. On the Home screen, touch ! 6HWWLQJV. 2. In the :,5(/(66 1(7:25.6 section, touch 0RUH ! 7HWKHULQJ SRUWDEOH KRWVSRW. 3. Select the 86% WHWKHULQJ check box to share your phone's data connection with your PC. You can now access the Internet from the PC.
reaches the set limit. You can also query the data usage within a certain period or by a certain application.
1 Touch 0RELOH 'DWD to turn on or off the mobile data function. The mobile data function must be turned on to configure data control and query data usage. 2 Select the 6HW PRELOH GDWD OLPLW check box. When data traffic reaches the preset limit, your phone's mobile data connection will be disabled. 3 Touch the scroll arrow beside 'DWD XVDJH F\FOH, then &KDQJH F\FOH . After setting the data usage cycle, touch 6HW.
• View Wi-Fi data usage: Select the Show Wi-Fi usage check box, and a WI-FI tab is displayed. Touch to tab to view Wi-Fi data usage. 2. In the :,5(/(66 1(7:25.6 section, touch the switch on the right of %OXHWRRWK, and a Bluetooth icon will be displayed on the notification bar. Bluetooth 3. Touch %OXHWRRWK, and your device's Bluetooth name is displayed on the screen. Touch the device name and set your device to be visible to other Bluetooth devices.
2. On the Home screen, touch ! 6HWWLQJV. 3. In the :,5(/(66 1(7:25.6 section, touch %OXHWRRWK. Your phone will then scan for other Bluetooth devices within range. 4. From the list of the Bluetooth devices searched, choose the device you want to connect, and then follow the onscreen information to pair. To disconnect from the Bluetooth device, in the 3$,5(' '(9,&(6 ! 8QSDLU.
Email/Gmail 3. Follow the onscreen instructions to configure the account settings. Email With (PDLO, you can easily send and receive emails. 4. Touch 1H[W, and the ,QER[ of the newly configured email account will be displayed. Adding an Email Account When using the Email application for the first time, set up an email account as follows: (Note that a data connection is required to send and receive emails). 1. On the Home screen, touch ! (PDLO. 2.
2. If you have already set up an email account, touch ! 6HWWLQJV ! $'' $&&2817 ! ([FKDQJH to add an Exchange account. If you have not set up any email accounts, touch ([FKDQJH to create an Exchange account. 3. Follow the instructions and enter the required information about the Exchange account you want to add. For details, contact the server administrator. 4. Touch 1H[W to display the $FFRXQW VHWXS screen. Configure the synchronization settings for this account. 5.
2. Touch also touch ! 5HSO\ DOO to reply to the email. You can or ! )RUZDUG to forward the email. Viewing an Email In your ,QER[, touch the email you want to view. You can also touch to view more folders. Saving an Email Attachment 1. In your ,QER[, touch the email you want to view. 2. Touch the $WWDFKPHQW tab to display the attachment. 3. Touch 6$9( to download the attachment. By default, downloaded files are saved to the 'RZQORDG folder in the phone memory.
Gmail Switching Between Accounts *PDLO is Google's web-based email service. When you first set up your phone, you may have to set it up to use an existing *PDLO account or create an account. The first time you open *PDLO on your phone, the ,QER[ screen is displayed. 1. From the email list, touch the current account name to display the account list. Opening Gmail Creating and Sending an Email On the Home screen, touch ! *PDLO. The email list is displayed.
3. Enter the email subject, and then write your email in the composition field. If you want to send an attachment with the email, touch • If you touched content. , then $WWDFK ILOH to select the file to be attached. 4. When the email is ready to be sent, touch email. to send the or selected 5HSO\ DOO, add message • If you selected )RUZDUG, enter the recipients' email addresses and add message content as required. 4. Touch to send, or touch email as a draft.
Managing Applications 2. Touch a category, then the application you want to download. Using Play Store 3. On the application details screen, read any relevant information about the application, including its cost, rating, and user comments. Android 3OD\ 6WRUH provides direct access to applications and games can be downloaded and installed on your phone. 4. To install the application, touch 'RZQORDG or ,QVWDOO, then $FFHSW GRZQORDG. To open the 3OD\ 6WRUH, on the Home screen, touch 3OD\ 6WRUH. 5.
• On the application details screen, touch the application. to share Uninstalling an Application from Your Phone 1. On the 3OD\ 6WRUH screen, touch downloaded applications. ! 0\ DSSV to view your 2. Touch the application you want to uninstall, and then touch 8QLQVWDOO. 3. When prompted, touch 2. to remove the application from your phone. 55 Installing an Application from a microSD Card Using $SS,QVWDOOHU, you can install an application stored on a microSD card.
2. Select the application you want to install from the application list. Touch , then Select all or Deselect all to select or deselect all applications. 3. Touch ! ,QVWDOO to install the selected application. Viewing and Uninstalling Applications 1. On the Home screen, touch to view the application list. ! 6HWWLQJV ! $SSV ! $// 2. Touch an application to view its details. 3. To uninstall the application, touch 8QLQVWDOO and follow the onscreen instructions.
Security Guard 6HFXULW\ *XDUG is integrated with your phone to provide security functions including: blocking calls and messages; encrypting messages, calls, and files, Password Safe; and querying home locations of incoming calls. No charges are incurred by the use of this application. On the Home screen, touch following options: ! 6HFXULW\ *XDUG for the • To view calls and messages that have been blocked, touch Blocking logs. • To view or edit the BLACKLIST and WHITELIST, touch Blacklist and whitelist.
Browser Managing Bookmarks Adding a Bookmark Browsing a Web Page 1. On the Home screen, touch browser. ! %URZVHU to launch the 2. Enter a website address in the address box at the top. • Touch to view the thumbnails of all web pages currently open, from where you can switch between pages. • Touch + to open a new browser window. 1. Launch the browser, and go to the web page you want to save as a bookmark. 2. Touch ! 6DYH WR ERRNPDUNV. 3. Enter the bookmark name, and then touch 2..
SAVED PAGES tab to view saved pages. Setting the Home Page 1. In a browser window, touch 6HW KRPHSDJH. ! 6HWWLQJV ! *HQHUDO ! 2. Select one page from the list, or touch RWKHU to enter the URL of the desired homepage, and then touch 2.. Customizing Browser Settings To customize your browser setting, in a browser window, touch ! 6HWWLQJV.
Maps Opening Maps On the Home screen, touch 0DSV enables you to find your current location, view real-time traffic conditions (depending on availability in your area), and get detailed directions to your destinations. You can view satellite images, traffic maps, or other kinds of maps of your current or other locations. Enabling the Location Service Enable the location service before using 0DSV to find your location or search for places of interest. 1. On the Home screen, touch ! 6HWWLQJV. 2.
2. Enter your start point in the first text box and your destination in the second. 3. Touch the icon for driving, public transit, or walking directions. 4. Touch *(7 ',5(&7,216. Directions are displayed in a list. 5. Touch a direction in the list to show it on the map. 6. When you finish viewing or following the directions, touch ! 'LUHFWLRQV to reset the map.
Capturing Photos and Videos Camera Mode 7 1 6 Your phone supports various capture modes and picture effects, with which you can take a photo, record a video, and share the photos and videos. 5 2 Camera 3 On the Home screen touch ! &DPHUD to activate the camera. You can then take a picture. On the viewfinder screen, touch 4 to exit the camera. 1 62 Switch between camera and video capture modes.
• Touch to take a photo. Touch to display the options menu as follows: 2 • Touch and hold to focus the camera, and then release your finger to take a photo. 3 Thumbnail of the previous shot. Touch to view the photos you just took. 5 • : Switch the picture mode. • : Select a filtering mode. • : Select a picture effect. • 4 Viewfinder screen. Touch anywhere to focus the camera. : Set the scene mode, the while balance, ISO, and more. 6 Set the flash mode.
customize the camera settings or select a picture effect. When you are customizing the settings, the image displayed on the viewfinder screen changes accordingly. 2. Press the volume buttons to zoom in or zoom out. 3. Touch anywhere on the viewfinder screen to focus the camera. 4. Touch to take a photo. • Touch to send the photo via a multimedia message, an email, Bluetooth and more. • Touch ! 'HOHWH to delete the photo. • Flick left or right across the screen to scroll between photos in the gallery.
touch > Settings > Location services, and select the GPS Video Camera Mode satellites check box. Video Camera 7 On the Home screen touch ! &DPHUD to activate the video camera. Switch to camcorder mode to start recording. On the capture screen, touch 1 6 2 5 to exit the camera. 3 4 1 65 Switch between camera and video capture modes.
2 Touch to start recording. 3 Thumbnail of the previous recording. Touch to view the video you just recorded. 4 Viewfinder screen. Touch to display the options menu as follows: 5 66 Switch between the front and rear cameras. Recording a Video 1. Open &DPHUD and switch to video capture mode. Customize the video capture settings if necessary. When you are customizing the settings, the image displayed on the viewfinder screen changes accordingly. • 1280 720 : Set the video size.
• Touch to enter the gallery. • Touch to send the video via a multimedia message, an email, Bluetooth and more. • Touch ! 'HOHWH to delete a video. • Flick left or right across the screen to switch between videos.
Gallery 2. On the picture editing screen, you can: 1 Your *DOOHU\ application is a great tool for managing photos and videos. 2 Viewing Photos or Videos 1. On the Home screen touch ! *DOOHU\ to open the media library. In *DOOHU\, touch the desired folder to view its contents. 2. Touch the photo or video you want to view. Editing a Picture 1. When viewing a picture, touch 68 ! (GLW.
1 Save the changes. Rotating a Picture 2 Undo the last step or redo the canceled step. 1. When viewing a picture, touch menu. 3 Crop or rotate the picture, or remove red eye. 2. Touch 5RWDWH /HIW or 5RWDWH 5LJKW. The picture will be saved with the new orientation. 4 Adjust the hue or saturation, or set the picture to black and white. Change filtering effects such as /RPR, 5 'RFXPHQWDU\, or 9LJQHWWH. Set exposure compensation, brightness, and 6 shade. to display the options Cropping a Picture 1.
Music Player With a built-in music player, your phone enables you to play your favorite songs at any time. Opening the Media Library On the Home screen touch media library. ! 0XVLF to access your 0XVLF provides seven tabs to help organize your music: 3OD\OLVWV, $UWLVWV, 6RQJV, $OEXPV, *HQUHV, and )ROGHUV. Flick left or right across the screen to display the content of each tab. Adding an Audio File to a Playlist 1. Choose a tab from the media library. 70 2.
Playing a Playlist 2 1. On the media library screen, touch the 3OD\OLVWV tab. 1 3 2. Touch and hold the playlist you want to play. 3. From the displayed menu, touch 3OD\. Playing an Audio File 1. Select a tab on the media library screen. 2. Select a playlist and touch the desired audio file to play. When playing the music, you can: 4 5 1 71 Enter the media library.
2 Activate or deactivate the Dolby Mobile sound effect. Copying an Audio File 3 Display the playlist. 4 Progress slider, showing the playback progress of the current song. Audio files can be copied to a microSD card using MTP and HiSuite, or by setting your phone as a mass storage device and transferring files from your PC using a USB connection. 5 Control keys. Touch to pause, to play the previous song, and next song. to continue, to play the To use other applications when playing music, touch .
You can access files saved in the phone memory and on the microSD card from the PC and copy music to the microSD card. and on the microSD card from the PC and copy audio files to the microSD card. Copying an Audio File Using HiSuite Copying Audio Files to USB Mass Storage Devices With HiSuite you can manage and synchronize data on your phone. Before using this function, ensure that a microSD card is correctly installed. 1. Use a USB cable to connect your phone to the PC. 1.
5. Copy audio files from the PC to the folder you have just created. 6. When the data is transferred, open the notification panel on your phone. Touch 7XUQ RII 86% VWRUDJH to display the 86% 0DVV 6WRUDJH screen, and then touch 7XUQ RII 86% VWRUDJH to disconnect your phone from the PC.
Accounts and Synchronization You can use certain applications to synchronize data such as contacts and emails with Internet services. To use an application to synchronize data, on the Home screen touch ! 6HWWLQJV ! $FFRXQWV V\QF to open the accounts and synchronization application. Adding an Account 1. On the $FFRXQWV V\QF screen, touch $'' $&2817, and then select the account type you want to add. 2. Follow the onscreen instructions to enter account information. 75 3.
Synchronizing Data On the $FFRXQWV V\QF screen, enable the account synchronization function, and your phone will synchronize your data in the background automatically. Changing the Account Synchronization Settings 1. On the $FFRXQWV V\QF screen, choose the account whose synchronization settings you want to change. 2. The displayed $FFRXQWV V\QF section shows a list of data that can synchronized. 3. Select the items to be synchronized. Your phone will start synchronization immediately.
More Applications 3. Touch to save the event. Viewing a Calendar Event Calendar On the Calendar screen, you can touch any of the events you want to view. &DOHQGDU enables you to easily manage and arrange events. To open the calendar, touch screen. ! &DOHQGDU on the Home Creating an Event 1. Open the calendar application, touch , and then select 1HZ HYHQW from the displayed options menu. You can also touch any date on the screen to create an event on that date. 2.
Setting an Event Reminder 1. You can touch any event on a calendar screen to view the event details. 2. To add a reminder for an event, touch $GG UHPLQGHU. To delete a reminder, touch X. 3. To set how long before the event you want to be reminded, touch the reminder period, and then select a desired time period in the displayed dialog box. You will be notified about the event at the reminder time.
2. Enter the folder name, and then touch 6DYH to save the folder. 1. On the ,QWHUQDO or 6' FDUG screen, touch and hold the file you want to move or copy. 2. Enter part or all of the desired file name, and then touch *R on the lower right corner of the keyboard (note that *R may not be the word displayed on your keyboard depending on the input method you are using). The phone will then search for the file in all folders and display the search results in a list. 2. Select &XW or &RS\ in the displayed optio
2. Touch and hold the file you want to compress, and then choose Compress from the displayed options menu. 3. In the displayed dialog box, edit the save path and name of the file compressed if necessary. Touch OK to start compressing the file. To compress multiple files, touch then > Select item(s), and > Compress to compress the selected files. Extracting a File 1. Touch and hold the compressed file you want to extract, and then choose Extract from the displayed options menu. 2.
5. To set your phone to vibrate when the alarm goes off, select the 9LEUDWH check box. 6. To name the alarm, touch /DEHO. Using the Notes 7. To save your alarm, touch 2.. The alarms will ring even when your phone is powered off. ! 6HWWLQJV to customize Using the Calculator 1. On the Home screen, touch 81 ! &DOFXODWRU. ! 1RWHV. 1. On the Home screen, touch 2. To create a note, touch Customizing Alarm Settings On the alarms list screen, touch the existing alarms. 2.
Weather Clock Adding a City You can use :HDWKHU &ORFN to check the date and time at cities around the world, to get the latest weather in any city and to share weather information with others. On the :HDWKHU &ORFN screen, touch city. On the Home screen, touch ! :HDWKHU &ORFN. Turn on the GPS and data service on your phone before using Weather Clock. ! $GG FLW\ to add a When using Weather Clock, you can add up to four additional cities besides your current city and get weather information for all o
touch ! 5HIUHVK or weather. to update the current city's You can also set your phone to update :HDWKHU &ORFN automatically: 1. On the :HDWKHU &ORFN screen, touch ! 6HWWLQJV. FM Radio The built-in FM radio enables you to listen to radio on your phone. Because the application uses the headset as its antenna, connect the headset to the phone before using the application. 2. Select the $XWR XSGDWH check box. Searching For and Saving Channels 3.
FM Radio 5 1 4 2 3 84 1 Tune the radio to the next station. 2 Access the station list. 3 Turn the FM radio on or off. 4 Activate or deactivate the speaker. 5 Tune the radio to the previous station. YouTube
Opening YouTube On the Home screen, touch !
Configuring Phone Settings ! 6HWWLQJV to configure your On the Home screen, touch phone settings. Setting the Date and Time When your phone is using date and time settings automatically provided by the network, you cannot set the date, time, and time zone manually. 1. On the 6HWWLQJV screen, touch 'DWH WLPH. 2. Clear the $XWRPDWLF GDWH WLPH and $XWRPDWLF WLPH ]RQH check boxes. 3. Touch 6HW GDWH, then 6HW. 86 or to adjust the date. Touch 4. Touch 6HW WLPH, then 6HW. or to adjust the time.
• Wallpaper: Change the background picture of the Home screen. The volume can also be adjusted as follows: • Auto-rotate screen: If this function is enabled, when you rotate your phone while browsing a webpage, viewing a picture or composing a message, the screen display rotates to automatically fit the new screen orientation. 2. Drag the slider left to reduce the volume, or drag it right to increase the volume. • Sleep: Set a sleep period for your screen.
Security Settings Turning On the SIM PIN A Personal Identification Number (PIN) protects your SIM card from unauthorized use. If you incorrectly enter the PIN three consecutive times, the PIN will be blocked and the phone prompts you to enter the PIN Unblocking Key (PUK). If you incorrectly enter the PUK 10 consecutive times, your SIM card will become permanently invalid. If the PIN and PUK are not provided with the SIM card or you no longer have them, contact your network operator.
If you have set up a Google account, unlock your screen as follows if you forget the screen unlock pattern: • If you incorrectly draw the unlock pattern five times, a Forgot pattern? button is displayed. Touch this button to open the Google account login screen. Enter your user name and password, and then reset your screen unlock pattern. • If you incorrectly draw the unlock pattern 20 times, the Google account login screen is displayed.
2. Touch 5HVHW SKRQH according to the onscreen instructions. Touch (UDVH HYHU\WKLQJ. The phone is reset to its factory settings, and then restarts. Back up important data on your phone before restoring factory settings. To do so, on the Settings screen, touch Backup & reset > Factory data reset > Reset phone > Backup data. Online Upgrade Your phone is preset with the online upgrade function for applications. You will be notified when updates are available.
FAQs More FAQs are available at www.huaweidevice.com/cn/ faq.do?method=index. How Do I Free Up Phone Memoryᷠ • Move files and email attachments from your phone memory to your microSD card. • Open the %URZVHU application, and delete locally cached content. • Uninstall applications you no longer use. • Restore your phone to its factory settings. How Do I Use a microSD Card to Import Contacts from Another Phoneᷠ Your phone supports only contact files in .vcf format. 1.
How Do I Use HiSuite to Import Contacts from Another Phoneᷠ Your phone supports only contact files in .vcf format. 1. Save a .vcf file to a PC. 2. Touch ! 6HWWLQJV ! 'HYHORSHU RSWLRQV ! 86% GHEXJJLQJ. 7. Disconnect your phone from the PC after the contacts are imported. How Do I Set a Song as a Call Ringtoneᷠ In 0XVLF , touch and hold the song you want to set as the ringtone, and then choose 6HW DV ULQJWRQH from the displayed options menu. 3. Use a USB cable to connect your phone to the PC.
How Do I Change the Input Methodᷠ On a text-composing screen, open the notification bar and touch 6HOHFW LQSXW PHWKRG to select a desired input method. How Do I Stop the Music Playing in the Backgroundᷠ Open the notifications panel, touch the music playing notification to go to the music playback screen, and then stop playing the song. How Do I Return to the Call Screenᷠ Open the notifications panel, and then touch the ongoing call.
Appendix Safety Precautions Please read the safety precautions carefully to ensure the correct use of your mobile phone. Do not crash, throw, or puncture your mobile phone. Avoid the falling, squeezing, and bending of your mobile phone. Do not use your mobile phone in a moist environment, such as the bathroom. Prevent your mobile phone from being soaked or washed in liquid. 94 Do not switch on your mobile phone when it is prohibited to use phones or when the phone may cause interference or danger.
Do not attempt to disassemble your mobile phone or its accessories. Only qualified personnel are allowed to service or repair the phone. Do not place your mobile phone or its accessories in containers with a strong electromagnetic field. Do not place magnetic storage media near your mobile phone. Radiation from the phone may erase the information stored on them. Do not put your mobile phone in a hightemperature place or use it in a place with flammable gas such as a gas station.
recommended to help you protect personal and confidential information. • Place your device in a safe area to prevent it from unauthorized use. • Set your device screen to lock and create a password or unlock pattern to open it. • Periodically back up personal information kept on your SIM/ UIM card, memory card, or stored in your device memory. If you change to a different device, be sure to move or delete any personal information on your old device.
• Some applications require and transmit location information. As a result, a third-party may be able to share your location information. • Your device may provide detection and diagnostic information to third-party application providers. Third party vendors use this information to improve their products and services. • If you have concerns about the security of your personal information and data, please contact mobile@huawei.com. 97 Legal Notice Copyright © Huawei Technologies Co., Ltd. 2012.
Trademarks and Permissions , , and are trademarks or registered trademarks of Huawei Technologies Co., Ltd. Android is a trademark of Google Inc. Other trademarks, product, service and company names mentioned are the property of their respective owners. Notice Some features of the product and its accessories described herein rely on the software installed, capacities and settings of local network, and therefore may not be activated or may be limited by local network operators or network service providers.
Co., Ltd. shall not compensate or be liable for services provided by third-party service providers, or the interruption or termination of third-party contents or services. Huawei Technologies Co., Ltd. shall not be responsible for the legality, quality, or any other aspects of any software installed on this product, or for any uploaded or downloaded third-party works, such as texts, images, videos, or software.
THE MAXIMUM LIABILITY (THIS LIMITATION SHALL NOT APPLY TO LIABILITY FOR PERSONAL INJURY TO THE EXTENT APPLICABLE LAW PROHIBITS SUCH A LIMITATION) OF HUAWEI TECHNOLOGIES CO., LTD. ARISING FROM THE USE OF THE PRODUCT DESCRIBED IN THIS DOCUMENT SHALL BE LIMITED TO THE AMOUNT PAID BY CUSTOMERS FOR THE PURCHASE OF THIS PRODUCT.
pacemaker to prevent potential interference with the pacemaker. If you are using a pacemaker, use the device on the opposite side of the pacemaker and do not carry the device in your front pocket. Potentially Explosive Atmosphere Power off your device in any area with a potentially explosive atmosphere, and comply with all signs and instructions. Areas that may have potentially explosive atmospheres include the areas where you would normally be advised to turn off your vehicle engine.
• When you have to make or answer a call, park the vehicle at the road side before using your device. • RF signals may affect electronic systems of motor vehicles. For more information, consult the vehicle manufacturer. • In a motor vehicle, do not place the device over the air bag or in the air bag deployment area. Otherwise, the device may hurt you owing to the strong force when the air bag inflates. • Do not use your device while flying in an aircraft. Power off your device before boarding an aircraft.
power consumption. As a result, the talk time and the standby time are reduced. • While using the device, observe the local laws and regulations, and respect others' privacy and legal rights. • Keep the ambient temperature between –10°C and 40°C while the device is being charged. Keep the ambient temperature between –10°C to 40°C for using the device powered by a battery. Prevention of Hearing Damage Using a headset at high volume can damage your hearing.
Battery and Charger • Unplug the charger from the electrical plug and the device when not in use. • The battery can be charged and discharged hundreds of times before it eventually wears out. When the standby time and the talk time are shorter than the normal time, please contact Huawei or an authorized service provider. • Use the AC power supply defined in the specifications of the charger. An improper power voltage may cause a fire or a malfunction of the charger.
• Do not place your device and charger in places where they can get damaged because of collision. Otherwise, it may lead to battery leakage, device malfunction, overheating, fire, or explosion. • Do not place magnetic storage media such as magnetic cards and floppy disks near the device. Radiation from the device may erase the information stored on them. • Do not leave your device and charger in a place with an extreme high or low temperature.
Emergency Call You can use your device for emergency calls in the service area. The connection, however, cannot be guaranteed in all conditions. You should not rely solely on the device for essential communications. Certification Information (SAR) This device meets guidelines for exposure to radio waves. Your device is a low-power radio transmitter and receiver. As recommended by international guidelines, the device is designed not to exceed the limits for exposure to radio waves.
radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
Please visit www.huaweidevice.com/worldwide/support/hotline for recently updated hotline and email address in your country or region.
