Wonderful Communication, Mobile Life Welcome to HUAWEI U1107 Mobile Phone from Huawei Technologies Co., Ltd.
Notice Copyright ¤ 2008 Huawei Technologies Co., Ltd. 8 All Rights Reserved 1 No part of this manual may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. 2 3 Trademarks 4 and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks mentioned in this manual are the properties of their respective holders. 5 6 Notice 7 The information in this manual is subject to change without notice.
Safety Precautions 11 Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, refer to the 12 section “Warnings and Precautions”. Do not switch on your phone when it is prohibited to use mobile phones or when the phone may cause interference or danger. Do not use your phone while driving. Follow any rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus.
Observe any laws or regulations on the use of wireless device. Respect others’ privacy and legal rights when using your wireless device. Strictly follow the relevant instructions on 48 of this manual while using the USB cable. Otherwise your phone or PC may be damaged.
1 Table of Contents Table of Contents 1 Getting to Know Your Phone 1 Packing List ................................................1 Your Phone ................................................2 Getting Started 6 Loading/Unloading the SIM Card ...............6 Charging the Battery ..................................7 Powering On/Off.........................................8 Call Service 10 Making or Answering Calls.......................10 Operations During a Voice Call ................11 Calls .............
Bluetooth ..................................................34 USB ..........................................................35 Settings 37 Phone settings..........................................37 Display settings ........................................38 Message settings .....................................38 Call settings..............................................38 Connectivity..............................................41 Network ...................................................41 Security .
1 Getting to Know Your Phone Your phone can operate in virtually all countries, automatically switching between WCDMA 850/2100 and GSM/GPRS 850/900/1800/ 1900 networks. This allows you to enjoy communication wherever you use your mobile phone. 7 One CD-ROM disk which contains U1107 Mobile Phone PC Assistant (optional) Note The services supported by your phone should be also supported by the network from where you use the phone. For details, please contact your service provider.
Your Phone Your Phone Scroll key Earpiece • Press this key to scroll through a menu. • To quick access Browser, Contacts, text message editor and Alarms. Left function key • To activate the function indicated at the left of the prompt bar on the screen. • To access the main menu in standby mode. Message key • To access the SMS Mailboxes screen in the standby mode. Send key • To make or answer a call. • To access the Call Log screen in the standby mode.
Your Phone Back and Side View Home Screen 1 Desktop To display the operations and the function options. Prompt bar To display the operations currently available. ƹ Icon bar This area displays the phone status. The following table illustrates all the icons that may appear on this bar. Bottom View Charger connector/Cable connector Icon Headset jack Mircophone Getting to Know Your Phone Icon bar Description Indicates signal strength. The more bars that appear, the stronger the signal.
Your Phone Icon Description Icon Description Indicates network connection state. Call line 2 is enabled currently. Indicates security connection state of the network. Forwarding all incoming voice calls to line 2. The phone is in a call. Your PC connects to the Internet through your phone. The keypad is locked. Indicates power level of the battery. Alarm clock is enabled. Bluetooth is enabled. You have new text messages. You have new PUSH messages. You have new voice mail.
Your Phone Use the selected function according to the prompts on the screen. 5 Select Back to return to the previous menu. Press to return to the standby mode.
2 Getting Started Loading/Unloading the SIM Card Load your SIM card before using your phone. To use the SIM card properly, please read the following instructions carefully. 3 Fit the battery into the battery slot on back of the phone. Press the battery down until it clicks into place. 4 Slide the back cover to the phone. Note • Keep the SIM card out of the reach of children. • The SIM card and its metal contacts can be easily damaged by scratching or bending.
Charging the Battery 5 Charging the Battery Before charging the battery, please read the following precautions carefully. Note • When you charge the battery for the first time, please charge it for a minimum of 12 hours. • The battery discharges even while not being used. If you have not used it for a long time, please recharge it first. • The charging time depends on the environmental temperature and the age of the battery. • The battery can be recharged but eventually wears out.
Powering On/Off Note • When the battery power level is very low, the phone makes alert sounds and displays a prompt. When the battery power level is too low, the phone will power off automatically. • When the battery is being charged, the charging indicator blinks continuously. When the charging indicator stops blinking, it indicates that the battery is full. Powering On/Off Powering On Ensure that the SIM card is in your phone and that the battery has been charged. Press and hold to power on your phone.
Powering On/Off available until you enter the PIN2 code. At the same time, your SIM card should support these functions. 2 Getting Started ƹ PUK To unlock a locked SIM card, you need to enter the PIN Unblocking Key (PUK) code. The PUK code is usually provided when you get the SIM card from Vodafone. If you have not received a PUK code or if you have forgotten it, contact your service provider. ƹ PUK2 Some SIM cards provide a PUK2 code that is used to unlock a locked PIN2 code.
3 Call Service Making or Answering Calls Making a Voice Call 1 Enter or edit a phone number in one of the following ways: Answering or Rejecting Calls You can set the answer mode to Any key or Send key. For details, refer to "Settings/Call Settings/ Answer mode". The following describes how to answer or reject a call in different answer modes: • Enter a phone number through the keypad. Operation • Select a number from the Call Log screen. Answer a call • Select a number from the Contacts screen.
Operations During a Voice Call Operation Reply by message Description Select Options > Reply to send a predefined message to the caller. Operations During a Voice Call Icon Description • New Call: To make a 3-party call during a call. • Handsfree/Earpiece: To switch between the Handsfree and the Earpiece modes during a call. • Other applications: To access the SMS screen, the Contacts screen or the Call Log screen. • Answer/Reject: Your phone allows you to handle two calls simultaneously.
Calls Select Call Log in the main menu and then press the left/right scroll key to select All calls , Missed , Received or Dialed . Then select Options for the following options. • Edit before call: To edit the number before making a call. • Create message: To send a message. • Save number: To save the numbers of the selected record. • Voice call: To make a voice call. • Display mode: You can select Normal to display all records or select Simple to ignore the duplicated records.
4 Call Log The recently dialed calls, received calls and missed calls are saved automatically. This makes it easier to refer to these calls. • Save number: To save the numbers of the selected record to the phone, the SIM card, or an existing contact. • Voice call: To make a voice call. Making Calls from Call Log 1 2 Select Call Login the main menu and then press the left/right scroll key to switch between All calls , Missed , Received and Dialed . Press the up/down scroll key to select a record.
5 Text Input You can use the keypad to enter alphanumeric characters and symbols. For example, you can add entries to the contacts, write messages or schedule events on the calendar. Note While entering text: • Press to switch between input methods, including "abc", "Abc", "ABC", and numbers. • Press method. to delete the letter before the T9 Input Method With the T9 input method, you can easily and quickly enter words. T9 is a predictive text entry mode. It allows you to easily and quickly enter words.
"123" Numeric Input Method ters. Repeatedly press the key that carries the letter to be entered when it appears on the screen. For example, to enter the word "Hello" with the traditional input method, follow these steps. 1 3 After entering the first letter, you can directly press another character key to enter the next letter. If the next desired letter is on the same key as the current one, wait until the cursor appears to the right of the current letter and then you can enter the next one.
6 Contacts Contacts enables you to save and manage such information as phone numbers and addresses of your contacts. You can save such information in your phone or your SIM card. You can also assign frequently-used numbers to speed dialing keys for your convenience. Making Calls from the Contacts You can make a voice call with a contact selected from the contacts list. 1 In the Contacts screen, press the left/right scroll key to select Phone or SIM . 2 Select a contact and select Options >Voice Call.
Other Operations Other Operations In the Contacts screen, press the left/right scroll key • My business card: To save your own information to a Business Card. You can send the information by SMS or Bluetooth. for the following options. • Backup contacts: To back up your contacts from your phone to a memory card or from your memory card to your phone. • Details: To view the details of contact. • Delete: To delete the selected contact. • Edit before call: To edit the number before making a call.
Groups 1 In the Contacts screen, press the left/right scroll key to select Groups. 2 Select a group and press to view the details. 3 Select Options > Add. Select a contact and press .The member you added is displayed in the group member list. To delete a group member, select a member from the group member list, and then select Options > Delete. Managing a Group 1 In the Contacts screen, press the left/right scroll key to select Groups. 2 Select a group and select Options for the following options.
7 Messaging Text Messages The maximum content for a single text message is 160 English letters. If the characters you enter exceed this limit, the text is divided into two or more continuous messages when it is sent. Creating a Text Message 1 Select Messaging > Write SMS in the main menu. 2 In the message editing screen, select Options: • Send:To send the message. • Insert number: You can insert a phone number saved on the phone or the SIM card.
Text Messages Icon Description a read message on the SIM card memory an unread message on the SIM card memory • Save number: To save the numbers retrieved from an SMS to phone or SIM memory or an existing entry in the contacts. • Extract URL: To extract URL address from an SMS for browsing web pages or tream media. a read message report • Save Email address: To retrieve email address from an SMS and save it. an unread message report • Copy to SIM: To back up the SMS to SIM memory.
Email ƹ Sent Sent is used to save the messages that have been sent. Icons in Sent 1 Select Messaging > Settings > SMS from the main menu. 2 Set the parameters related to messages. : A text message that has been sent and saved to Email the phone. : A text message that has been sent and saved to the SIM card. Viewing Messages in the Sent 1 Select Messaging > SMS > Sent. 2 Press the up/down scroll key to select a message and press to view the details. 3 Forward or make a call.
Email 5 In the email editing screen, select Options to save or send the email. The saved emails are in Messaging > Email > Drafts. Mailboxes Your phone provides four mailboxes for Emails, namely, Inbox, Drafts, Sent and Outbox. ƹ Inbox All Emails received are saved in the inbox. Icons in Inbox : A read email. : An unread email. Viewing and Editing Emails in Inbox 1 2 22 Other Options for Inbox 1 Access Inbox 2 Select Options for the following operations. • View: to view the selected email.
Email Icons in Drafts Icon for Outbox : Emails to be sent. Viewing and Editing Emails in Drafts : Emails failed to send. Viewing and Editing Emails in Outbox 1 Select the desired email in the drafts and press to access the editing screen. 1 Select an email and press editing screen. 2 Edit the related information. For details, perform the same operations as in creating an email. 2 Edit the related information. For details, perform the same operations as in creating an email.
Push Inbox Push Inbox Settings Push Inbox The Push Inbox is used to save the Push messages you have received. Viewing Push Messages In the Push Inbox, select a Push message, and then press to view the details of the Push message. Select Messaging > Settings > Push messages to set the Push inbox. ƹ Push message setting You can set the acceptable push messages. ƹ Enable push SL You can enable or disable the push SL function by selecting On or Off. ƹ Icon for Push Inbox • : A read Push message.
Voice Mail number • Auto delete: to set whether to auto delete earlier messages when the broadcast inbox memory is full. Voice Mail number The voice mail number is already preset for you in the phone. To access your voicemail, press and hold in standby mode. The phone dials the voice mail number automatically. Common Phrases 7 Messaging Your phone has been preset with some commonly used phrases. They are used for editing a new message, sending a message while answering a call and auto replying.
8Alarm Alarm Clock You can set several alarm clocks. You can also set the prompt messages, alarm tones and the cycle period for alarm clocks. Setting Alarm Clocks Enter alarm function, you can select one alarm from the list, and then press to set an alarm clock. In the screen for editing alarm clock, you can set the following items: alarm time, the prompt message, the ringtone, the alarm cycle, the snooze function, the vibration function, the alarm tone.
9Calendar Calendar Calendar Functions With this function, you can view the calendar and manage your schedules. Enter calendar function and select Options. You can perform the following operations. New Schedule • New: To create a new schedule. Enter calendar function, you can select Options > • Go to: To go to a certain date directly from the Month view screen. New to create the schedule events for the current day.
Calendar displayed. You can stop the ringing by pressing any key. On the prompt interface, you can snooze the alarm or stop the prompt.
10Organiser & Tools This function provides you with various assistant tools. You can access the Organiser & Tools screen by selecting Organiser & Tools from the main menu. SIM ToolKit In the screen for editing task, you can set the following items: the title of the task, the deadline, the priority level, the task state, the task alert, sound alarm, vibration, the alert time, the task type.
Calculator On the Memo Pad screen, you can perform the following operations: Edit, New, As SMS, Delete, Delete all and view the Memory status. 2 On the unit type selection bar, press the left/right scroll key to select weight or length. 3 On the From bar, press the left/right scroll key to select the unit to be converted from. 4 On the To bar, press the left/right scroll key to select the unit to be converted to. 5 Press the number keys to enter a numeric value to be converted in the Input bar.
World Time 2 On the From bar, press the left/right scroll key to select the currency to be converted from. 3 On the To bar, press the left/right scroll key to select the currency to be converted to. 4 On the Rate bar, enter the currency rate. Then you can view the conversion result. Press to clear the numeric values you entered. Select Setting in the currency converter screen, and you can select frequently used currency units. This makes it easy to switch between selected units in the From or To bar.
11 Browser The built-in browser makes it easy and pleasant to tour around the Internet. You can access the Browser screen by selecting Browser from the main menu. Homepage • Enter URL: To enter a website address and access it. • Recent pages: To access pages you have browsed recently. The recently browsed pages can be saved. Browsing Pre-set Web Pages • Save page: To save the pages in your phone. Web pages are saved to the Saved pages. On the homepage, select a link from the page.
Bookmarks Bookmarks 11 Browser With this option, you can save and edit the information of the websites that you often access. Select any one of them, and then select Options, you can perform the following operations. • Goto: To connect to the server to get the latest web page. • Add: To add a Title and Address for a bookmark. • Edit: To edit the selected bookmark. The preset bookmarks cannot be edited. • Delete: to delete the selected bookmark.
12 Connections Your phone provides you with many data communication functions. You can access the Connectivity screen by selecting Settings from the main menu. device, that device must support Bluetooth and the Bluetooth function must be enabled. 1 Select Switch On/Off > On-3 minutes from the Bluetooth settings list to enable the Bluetooth device. 2 Select Devices list. Bluetooth You may use the built-in modem of your phone to access the Internet with a PC.
USB Note Windows 2000 and Windows XP are supported. • Search new devices: To search for new Bluetooth devices. • Devices: To view all detected Bluetooth devices. • Visibility: To set whether your phone can be found by other devices when the Bluetooth function is enabled. • Rename: To rename your phone. • My device information: To view the detailed information of your phone, such as the device name and device address. • To use USB cable, please strictly obey the following rules.
USB Accessing the Internet by USB Connecting your phone to the PC with the USB cable enables the PC to use the phone as a modem. This helps to set up a dial-up connection to the Internet. 1 Select Settings > Connectivity > Modem and set the port to Modem via USB. 2 Install Mobile Phone PC Assistant. After inserting the CD, follow the prompts to complete the installation. 3 Connect your phone to the PC by using the USB cable. 4 Ensure the USB device is shown in Device Manager/Port of your PC.
13 Settings You can access the Settings screen by selecting Settings from the main menu. Phone settings You can change the settings of the phone, including Phone language, Input language, Date and time, Date format, Shortcuts, as well as Auto ON and OFF, Auto keypad lock, Keypad lock period. Phone language Your phone supports several languages. Select Settings > Phone settings > Phone language to select a language. In addition to these languages, you can also select Auto.
Display settings Auto keypad lock • Backlight time: To set the backlight delay time for the screen. The auto keypad lock function can prevent the phone from reacting to the accidentally key-pressing. You can enable or disable the function. • LCD sleep delay: To set the duration between backlight off and LCD off. Keypad lock period After enabling the auto keypad lock function, you can set the keypad lock period.
Call settings 2 Select the forwarding condition from All calls, If out of reach, If busy, and If not answer. 3 Then select the forwarding type from Voice call, Fax call, Data call and All services. 4 Select Activate or Deactivate to enable or disable the service. You can also select Check status to check the status of call forwarding service. Alternatively, you can select Disable all and then select one from the four items: Voice call, Fax call, Data call and All services.
Call settings Auto redial Calling ID This function is used to auto redial the dialed number if the dialing failed. This options allows you to select whether to display your phone number on the phone of the party who called you. If select Auto, whether your phone number will be shown on the called phone depends on the network. Answer mode It is used to set the mode for answering an incoming call. Two options are available: Any key and Send key.
Connectivity Note The old call barring password is provided by your network operator if it is the first time for you to change the password. Prompt to save Security You can change the settings related to the phone security. Reset This function is used to prompt whether to save the number when there is an incoming call. You can enable or disable this function. This option is used to reset your phone to the factory settings. Password lock Connectivity mation, refer to "Connections" on page 34.
Security Change password You can modify the phone password and PIN code. 1 Select Security > Change password. 2 Select one item from phone password, PIN code, and PIN2 code. 3 Enter the old password (The initial phone password of the U1107 is 0000). 4 Enter a new password. 5 Enter the new password again to confirm. Note • To modify the PIN code, you must set the "PIN lock" to "On" first. • If you enter the wrong PIN or PIN2 three times, the SIM card is locked.
14 Warnings and Precautions Electronic Device • Turn off your phone near high-precision electronic devices. The phone may affect the performance of these devices. • Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic-control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
Storage Environment • Area with chemical substances and particles (such as: granule, dust, metal powder) in the air • Area with the sign of "Explosives" • Area with the sign of "Turn off bi-direction wireless equipment" • Area where it is generally suggested to stop the engine or a vehicle Storage Environment • Do not place magnetic storage media such as magnetic cards and floppy disks near the phone. Radiation from the phone may erase the information stored on them.
Operating Environment Operating Environment • The phone, battery, and charger are not waterresistant. Keep them dry. Protect the phone, battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. • Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur. • When carrying or using the phone, keep the antenna at least one inch (2.
Environmental Protection • Keep the plug dry when you clean it, to prevent fire. • If the phone or any of its fittings does not work, turn to the local authorized service center for help. Environmental Protection • Please observe the local regulations regarding the disposal of your packaging materials, exhausted battery and old phone and please promote their recycling. Do not dispose of exhausted battery or old phone in municipal waste.
Charger flame to avoid fire or explosion. Then turn to an authorized maintenance engineer for help. • The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours. • If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin.
Using the USB Cable • Ensure the charger is properly plugged into the power socket properly when charging the battery. Improper insertion may result in electric shock, fire, or explosion. To unplug the charger, pull the plug off rather than tear off the power cord. • Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur.
Certification Information (SAR) and IEEE (Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the public. The levels include a safety margin designed to assure the safety of all persons, regardless of age and health, and to account for any variations in measurements. All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines.
Certification Information (SAR) metal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 1.01 W/kg, and when properly worn on the body is 1.04 W/kg. This device complies with Part 15 of the FCC Rules.
Certification Information (SAR) quency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
15 Acronyms and Abbreviations DCF DRM Content Format DRM Digital Rights Management FDN Fixed Dial Number GPRS General Packet Radio Service GSM Global System for Mobile communication OTA Over-The-Air PIN Personal Identification Number PLMN Public Land Mobile Network PUK PIN Unblocking Key SD Secure Digital Card SAR Specific Absorption Rate STK SIM Tool Kit URL Universal Resource Locator USB Universal Serial Bus WAP Wireless Application Protocol WCDMA Wideband Code Division Mult
16 Appendix The phone supports image files, video files and audio files of many formats. For details, see the following table. File type Formats Image JPG, PNG, BMP, GIF, BCI, WBMP, SVG, and SVGZ. Audio MP3, AAC/AAC+, AMR, MID, WAV (ADPCM), MMF, QCP, and XMF/DLS. Video 3GP, MP4, 3G2, and PMD. Note In some cases, the preceding media formats may not be supported.
