Wonderful Communication Mobile Life Welcome to U1000 Mobile Phone from Huawei Technologies Co., Ltd.
Notice Copyright © 2008 Huawei Technologies Co., Ltd. All Rights Reserved 1 No part of this manual may be reproduced or 2 transmitted in any form or by any means without 3 prior written consent of Huawei Technologies 4 Co., Ltd. 5 6 Trademarks 7 8 9 10 and HUAWEI are trademarks of Huawei Technologies Co., Ltd. All other trademarks mentioned in this manual are the properties of their respective holders.
Notice 11 The information in this manual is subject to change without notice. Every effort has been made in the preparation of this manual to ensure accuracy of the contents, but all statements, information, and recommendations in this manual do not constitute a warranty of any kind, expressed or implied. 12 Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, refer to the section “Warnings and Precautions”.
Safety Precautions 14 15 16 17 Please read the safety precautions carefully to ensure the correct and safe use of your wireless device. For detailed information, refer to the “Warnings and Precautions”. Do not switch on your phone when it is prohibited to use mobile phones or when the phone may cause interference or danger. Do not use your phone while driving. Follow any rules or regulations in hospitals and health care facilities. Switch off your phone near medical apparatus.
Switch off your phone near highprecision electronic devices. The phone may affect the performance of these devices. Do not attempt to disassemble your phone or its accessories. Only qualified personnel are allowed to service or repair the phone.. Do not place your phone or its accessories in containers with strong electromagnetic field. Do not place magnetic storage media near your phone. Radiation from the phone may erase the information stored on them.
Keep your phone and its accessories away from children. Do not allow children to use your phone without guidance. Use only approved batteries and chargers to avoid the risk of explosions. Observe any laws or regulations on the use of wireless device. Respect others’ privacy and legal rights when using your wireless device. Strictly follow the relevant instructions on 47 of this manual while using the USB cable. Otherwise your phone or PC may be damaged.
Table of Contents Table of Contents 1 Getting to Know Your Phone 1 Packing List................................................1 Your Phone ................................................2 Getting Started 7 Loading/Removing the SIM Card ...............7 Charging the Battery ..................................8 Powering On/Off.......................................10 Call Service 13 Making or Answering Calls.......................13 Operations During a Voice Call ................14 Call Log ..............
Organiser & Tools 31 Calculator .................................................31 World Time...............................................31 Alarms ......................................................32 Calendar...................................................33 Settings 34 Phone settings .........................................34 Display Settings .......................................41 Profiles .....................................................
1 Getting to Know Your Phone Your U1000 phone can operate in virtually all countries, automatically switching between WCDMA 2100 networks and GSM 900/1800/1900. This allows you to enjoy communication wherever you use your mobile phone. Note The services supported by your phone should be also supported by the network from where you use the phone. For details, please contact your service provider.
Your Phone Earpiece Screen OK key Left function key Message key Send key Scroll key Right funciton key Clear key Power/End key * key # Key Headset jack Microphone Charger/Cable connector Keys key Description Left function key To activata the funciton indicated at the left of the prompt bar on the screen. To access the main meun in standby mode. Messages key To access the SMS screen in the standby mode.
key Send key Description To make or answer a call. To access the Call log screen in the sandby mode. Scroll key Press this key to scroll through a menu. * key Press and hold it to lock the keyboard in the standby mode.Then press it and OK to unlock the keyboard. OK key To start the selected function in the menu. To access the main menu in standby mode. Right function key To activate the funciton indicated at the right of the prompt bar on the screen.
key Description Power/End To end an ongoing call or reject an key incoming call. To return to the Home screen. Press and hold it to power on or power off the phone. # key Press and hold it to switch to the meeting profile from the current profile. To select the check box of the option item. Home Screen Icon bar Desktop To display the operations and the .function options. Prompt bar To display the operations currently available. Icon bar This area displays the phone status.
Icon Description Indicates signal strength. The more bars that appear, the stronger the signal. The phone is currently in a WCDMA network. You are using the roaming service. The phone is in a call. The keypad is locked. Alarm clock is enabled. You have new text messages. The phone is in mute mode. The normal profile is activated. The headset is plugged in. You have new voice mail. Call line 2 is enabled currently. Forwarding all incoming voice calls to line 2.
Icon Description Indicates power level of the battery. Introduction to the Menu Your phone provides an extensive range of functions. You can use these functions by navigating the following menus: Alarms, Calendar, Call Log, Profiles, Messaging, Display settings, Organiser & Tools, Contacts and Settings. 1 In the standby mode, press menu. 2 Press the scroll key to scroll through the menu, and then press to select. 3 If the menu contains further submenus, repeat step 2.
2 Getting Started Loading/Removing the SIM Card Load your SIM card before using your phone. To use the SIM card properly, please read the following instructions carefully Note • Keep the SIM card out of the reach of children. • The SIM card and its metal contacts can be easily damaged by scratching or bending. Ensure care when you carry, load or remove it. • Always disconnect the charger from the phone before loading or removing the SIM card.
phone. Press the battery down until it clicks into place. 4 Slide the back cover to the phone. 5 To remove the SIM card, power off your phone and take out the battery. Then press the SIM card with one finger and slide it out of the slot. Charging the Battery Before charging the battery, please read the following precautions carefully. Note • When you charge the battery for the first time, please charge it for a minimum of 12 hours.
• The battery discharges even while not being used. If you have not used it for a long time, please recharge it first. • The charging time depends on the environmental temperature and the age of the battery. • The battery can be recharged but eventually wears out. If the battery lasts for a shorter time period than usual after being charged normally, replace it with a battery of the same type.
of the phone as shown in the following figure. 2 Plug in the connector of the charger to a power socket. Note • When the battery power level is very low, the phone makes alert sounds and displays a prompt. When the battery power level is too low, the phone will power off automatically. • When the battery is being charged, the charging indicator blinks continuously. When the charging indicator stops blinking, it indicates that the battery is full.
Powering Off Press and hold to power off your phone. Access Codes If you have set the phone password and the PIN is ON, you have to enter the corresponding access codes when you power on your phone. For setting and changing the access codes, please refer to "Settings/Security Setup". Phone Password The phone password is used to protect your phone from unauthorized use. The phone password is preset as 0000 for your phone.
available until you enter the PIN2 code. At the same time, your SIM card should support these functions. PUK To unlock a locked SIM card, you need to enter the PIN Unblocking Key (PUK) code. The PUK code is usually provided when you get the SIM card from your service provider. If you have not received a PUK code or if you have forgotten it, contact your service provider. PUK2 Some SIM cards provide a PUK2 code that is used to unlock a locked PIN2 code.
3 Call Service Making or Answering Calls Making a Voice Call 1 Enter or edit a phone number in one of the following ways: • Enter a phone number through the keypad. • Select a number from the Call Log screen. • Select a number from the Contacts screen. 2 Press to dial. 3 Press to end the call. Answering or Rejecting Calls The following describes how to answer or reject a call in different answer modes: Answer a call: • If the answer mode is Any key, press any key except and .
Reject a call: Press or select Options > Reject. End a call: • If the headset is not in use, you can press . • If the headset is in use, press the control key of the headset. Reply by message: Select Options > Reply SMS to send a predefined message to the caller. Operations During a Voice Call Icon Description : A call is ongoing. : The call is on hold. : There is a new incoming call during a call. Operations During a voice call, you can select Options to perform the following operations.
• End: To end all calls, the active call, the current call or the on hold call. • New Call: To make a 3-party call during a call. • Handsfree/Earpiece: To switch between the Handsfree and the Earpiece modes during a call. • Answer/Reject: Your phone allows you to handle two calls simultaneously. During a call, if there is a new incoming call, select Options > Answer to answer it or select Options > Reject to reject it. • Swap: To swap between calls during a 3-party call.
press the left/right scroll key to switch between All calls 2 , Missed , Recived and Dialed . Press the up/down scroll key to select a record. Press to make a voice call. Other Operations Select Options for the following options. • Edit before call: To edit the number before making a call. • Create Message: To send a SMS. • Save number: To save the numbers of the selected record to the phone, the SIM card, or an existing contact. • Voice Call: To make a voice call.
4 Text Input You can use the keypad to enter alphanumeric characters and symbols. Note While entering text: • Press to switch between input methods, including "abc", "Abc", "ABC", and numbers. • Press method. to enable or disable T9 input • Press Press to display the commonlyused symbols list. You can use the scroll keys to select. • Press sor. to delete the letter before the cur- T9 Input Method With the T9 input method, you can easily and quickly enter words. T9 is a predictive text entry mode.
then the predictive text scheme will present the candidate words composed by the letters you have entered in the drop-down menu. For example, to enter the word "good" with the T9 input method, follow these steps. 1 Press successively the keys , , , and which "g", "o", "o", and "d" belong to, and the candidate words composed by these letters will be shown in the drop-down menu. 2 Use the up/down scroll key to select "good".
1 Press chat carries "h" repeatedly and all letters carried by this key will be displayed successively on the screen. Stop when you see an "h" on the screen. 2 After entering the first letter, you can directly press another key (except ) to enter the next letter. If the next desired letter is on the same key as the current one, wait until the cursor appears to the right of the current letter and then you can enter the next one. 3 Enter "e", "l", "l" and "o" in the same way.
Symbol Input Method Your mobile phone provides an independent symbol input method. For example, to enter ":" with the symbol input method, you can just press the scroll keys to select ":" in the symbol list and then press . Input Different Languages In a text editing screen, select Options>Input language to set the language for the text. The indicator of the selected language will be displayed on the upper left cornor of the editing screen.
5 Contacts Contacts enables you to save and manage such information as phone numbers and addresses of your contacts. Making Calls from the Contacts 1 In the Contacts screen, press the left/right scroll key to select Phone or SIM . 2 Select a contact and select Options > Voice call. Alternatively, you can select Edit before call to edit the number before making the call. Searching for a Contact 1 In the Contacts screen, press the left/right scroll key to select Phone or SIM .
in the contact name you are searching for. Then the contacts whose names contain this string are displayed. You can also find a contact by entering the initials of the first name and the last name of the contact. For example, to find a contact named "Alice Green", enter the initials "ag". This contact is displayed in the candidate list. Other Operations In the Contacts screen, press the left/right scroll key to select Phone or SIM . Then select Options for the following options.
• Copy Marked To Phone:To copy your marked to the phone. • Speed Dial Number: To assign often-used numbers to speed dialing keys "2" to "9". • Delete: To delete the selected contact. • Mark/Unmark: To mark/unmark a record or all records in your phone and SIM card. • Memory status: To view the memory status of both your phone and SIM card. • Settings: To sort the contacts in the phone and the SIM card or to set an alert before saving.
To delete a group member, select a member from the group member list, and then select Options > Delete. Managing a Group 1 In the Contacts screen, press the left/right scroll key to select Groups. 2 Select a group and select Options for the following options. • Detail: to view the details of a group. • Rename: to change the name of a group. • Create message: to send a text message to all members of a group. • Delete: to delete a group and all members of the group.
6 Messaging Text Messages The maximum content for a single text message is 160 English letters. If the characters you entered exceed this limit, the text is divided into two or more continuous messages when it is sent. Creating a text Message 1 Select Messaging > Write SMS from the main menu. 2 In the message editing screen, select Options: • Send:To send the message. • Insert number: You can insert a phone number saved on the phone or the SIM card.
3 After editing the message, press 4 the "Edit numbers" screen. to access • nter the phone number, and then select Options > Send or press to send the message. • Select Options > Group or Contacts to choose a number and send the message. • Select Options > Save to drafts to save the message. SMS Mailboxes The phone provides three mailboxes for SMS, namely Inbox , Drafts and Sent . Inbox You can save the received messages in Inbox.
Icon Description a read message report an unread message report Viewing Messages in Inbox 1 Select Messaging > SMS > Inbox. 2 Press the up/down scroll key to view the messages and then press to view the details. 3 Reply or call back. • Press to reply with a text message. • Press to call back by a voice call. You can select Options for the following operations. • Reply: To reply the message. • Forward: To forward the message. • Edit before call: To edit the number.
Drafts The Draft box is used to save the messages you created and saved and those which failed to send. Icons in Drafts : A text message saved to the phone. : A text message saved to the SIM card. Viewing and Editing Messages in the Drafts 1 Select Messaging > SMS > Drafts. 2 Press the up/down scroll key to select a message and press to edit it. Sent Sent is used to save the messages that have been sent. Icons in Sent : A text message that has been sent and saved to the phone.
3 Forward or make a call. • Press • Press to forward a text message. to make a voice call. You may select Options to do the same operations as those of SMS Inbox. SMS Settings 1 Select Messaging > Settings > SMS from the main menu. 2 Set the parameters related to messages: • Message center: You can set your mobile phone to retrieve the message center number from the SIM card or the phone. If you have deleted the information by accident, contact your service provider.
• Signature: To set whether your signature will be sent along with the message. You can edit the signature while creating a new message. • Status report: You can set it to On or Off. If you set it to On, the network will send you the information on whether the message has reached the recipient. • Concatenated SMS: You can set it to On or Off. If you set it to Off, you cannot edit and send messages longer than the limits of a single SMS.
7Organiser & Tools Calculator You can select Organiser & Tools > Calculator from main menu. • Press the number keys to enter the figures. • Press the scroll key to enter the operators. • Press the left function key to clear. • Press the right funciton key to exit Calculator. • Press input method switch key to enter a radix point. • Press clear key to delete the character to the left of the cursor. • Press ok key to enter an equal mark.
local time. To set the phone to DST, switch to the desired time zone and then select Options > Set to DST. Alarms Alarm Clock Setting Alarm Clocks Enter alarm function, you can select one alarm from the list, and then press to set an alarm clock. Prompt Interface for an Alarm When it is time for an alarm clock to ring, the selected alarm tone is played and a prompt interface is displayed. You can stop the ringing by pressing any key.
Calendar Calendar Functions Enter calendar function and select Options. You can perform the following operations. • Go to: To go to a certain date directly from the Month view screen. • Settings: To set week begin day.
8 Settings Phone settings Phone settings You can access the Phone settings screen by selecting from the Settings menu. • Phone Language: Your mobile phone supports several languages. Select Settings > Phone settings > Phone language to select a language. Besides these languages, you can also select Auto. This option is used to set the phone language to be the same as that used in your SIM card • Input Language: The option is used to set the language used to enter text.
• Auto keypad lock: The auto keypad lock function can prevent the phone from reacting to the accidentally key-pressing. • Keypad lock period: After enabling the auto keypad lock function, you can set the keypad lock period. If there is no operation on the phone within a preset period of time, the keypad is locked automatically. You can press Note and to unlock the keypad. If you have removed the battery from the mobile phone, you may need set the time after switching on the mobile phone.
2 Select the forwarding condition from All calls, If out of reach, If busy, and If not answer. 3 Select Activate or Deactivate to enable or disable the service. You can also select Check status to check the status of call forwarding service. Alternatively, you can select Disable all and then select one from the four items: Voice call, Fax call, and All services. Then press vices of this type.
Disable All Select one, and then enter the call barring password. press to cancel all call barring services of each type. Call Waiting This option is used to enable or disable the call waiting function. You can also view whether the call waiting function is enabled by checking the status. The call waiting function is network-dependent. For more information, please consult your service provider. Auto Redial This function is used to auto redial the dialed number if the dialing failed.
• Message: To auto send a text message that is preset and chosen from the Common phrases to the current caller. • Disable: To disable the auto answer function. Calling ID This options allows you to select whether to display your phone number on the phone of the party who called you. Select Call settings > Calling ID for the following options. • Auto: Whether your phone number will be shown on the called phone depends on the network.
Call Barring Password This function is used to change the password for call barring. Select Call barring password from the Call settings screen. Now you can change the call barring password. Note The old call barring password is provided by your network operator if it is the first time for you to change the password. Prompt to save This function is used to prompt whether to save the number when there is an incoming call. You can enable or disable this function.
Reset This option is used to reset your phone to the factory settings. Password lock This option is used to enable or disable the "Phone lock" and "PIN lock". 1 Select Phone lock/PIN lock. 2 Press the up/down scroll key to select On or Off. 3 Set passward: • Phone password: Enter the phone password. • PIN password: If the desired status is the same as the current status, just press . Conversely, you need to select the desired status and then enter the PIN code.
4 Enter a new password. 5 Enter the new password again to confirm. Note • To modify the PIN code, you must set the "PIN lock" to "On" first. • If you enter the wrong PIN or PIN2 three times, the SIM card is locked. You need the PUK or PUK2 code to unlock the SIM card. If you enter the wrong PUK or PUK2 code 10 times in total, the SIM card is locked permanently. • PUK or PUK2 code are delivered with the SIM card. If you have not received one or have forgotten it, contact your service provider.
• Backlight time: To set the backlight delay time for the screen. • LCD sleep delay: To set the duration between backlight off and LCD off. • Greeting message: To enter a greeting message that appears on the screen when you power on your phone. Profiles You can select Profiles from main menu. Your mobile phone provides various profiles, including Normal, Meeting, Silent, Activity, Headset, Offline, My profile 1 and My profile 2.
9 Warnings and Precautions Electronic Device • Turn off your phone near high-precision electronic devices. The phone may affect the performance of these devices. • Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automaticcontrol devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
• Do not take your phone into the operating room (OR), intensive care unit (ICU), or coronary care unit (CCU). • Do not use your phone at places for medical treatment where phone use is prohibited. • When using your phone near someone who is suffering from a heart disease, turn down the ring tone volume or vibration properly so that it does not affect the person.
• Area with the sign of "Turn off bi-direction wireless equipment" • Area where it is generally suggested to stop the engine or a vehicle Storage Environment • Do not place magnetic storage media such as magnetic cards and floppy disks near the phone. Radiation from the phone may erase the information stored on them. • Do not put your phone, battery, or other accessories in containers with strong magnetic field, such as an induction cooker and a microwave oven.
• Do not put your phone in the back pocket of your trousers or skirt, to avoid phone damage while seated. Children Safety • Put your phone, battery, and charger in places beyond the reach of children. Do not allow children to use the phone, battery, or charger without guidance. • Do not allow children to put the battery in mouth, for electrolyte in the battery is poisonous. • Do not allow children to touch the small fittings.
• When carrying or using the phone, keep the antenna at least one inch (2.5 centimeters) away from your body, to avoid negative impact on your health caused by radio frequency leakage. • If you feel uncomfortable (such as falling sick or qualm) after playing games on your phone for a long time, please go to see a doctor immediately. • On a thunder stormy day, do not use your phone outdoors or when it is being charged. • Do not touch the antenna when a call is going on.
• Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet. • Keep the plug dry when you clean it, to prevent fire. • If the phone or any of its fittings does not work, turn to the local authorized service center for help.
Emergency Calls You can use your phone for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the phone for essential communications. Battery • Use the battery approved by the manufacturer only. Otherwise, explosion may occur. • Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode. • Do not connect two poles of the battery with conductors such as cables, jewelries or any other metal material.
• The battery is not fully charged when delivered. Plug the charger cable into the bottom of the phone, plug the power supply unit into a mains power socket and charge for at least two hours. • If the battery fluid contacts your skin or cloth, wash with clean water immediately to avoid irritation to the skin. • If the battery fluid gets into eyes, do not rub your eyes. Otherwise, your eyes can be hurt. Wash with clean water and go to see a doctor immediately.
Charger • Use the charger approved by the phone manufacturer only. Any violation of this rule may result in fire or malfunction of the charger. • Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction of the charger. • If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the power cord at once. Otherwise, electric shock, short-circuit of the charger, or fire may occur. • Keep the charger dry.
• Do not place any heavy object on the power cord of the charger. Do not damage, change, or pluck the power cord. Otherwise electric shock or fire may occur. • When you are charging the battery with the charger, do not touch the plug, power cord or the charger with a wet hand. Otherwise, electric shock can be caused. • Once the liquid such as water leaks into the charger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur.
Certification Information (SAR) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD. Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection) and IEEE (Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies.
is because the mobile phone is designed to use the minimum power required to reach the network. All models of Huawei’s mobile phone are designed to meet radio frequency exposure guidelines. Before a phone model is available for sale to the public, it must be tested according to the technical standard-EN 50361 and does not exceed the limit established by the European Council Recommendation: 1999/519/EC for safe exposure.
worn operation, this phone has been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body with an accessory that contains no metal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 0.
Manufacturer's Address: Bantian, Longgang District, Shenzhen, 518129, Guangdong, P. R. China. is here with confirmed to comply with the requirements set out in the Council Directive1999/5/EC for radio equipment and telecommunications terminal equipment. For the evaluation of the compliance with this Directive, the following standards were applied: Safety: EN 60950-1:2001 First Edition+A11:2004; Health: EN 50360:2001; EN 50361:2001; EMC: EN 301 489-1 V1.6.1; EN 301 489-24 V1.3.1; Radio: EN 301 908-1 V2.2.
10 Acronyms and Abbreviations FDN Fixed Dial Number PIN Personal Identification Number PLMN Public Land Mobile Network PUK PIN Unblocking Key SAR Specific Absorption Rate USB Universal Serial Bus WCDMA Wideband code division multiple access 57