User's Guide

HUAWEI TE30 Videoconferencing Endpoint

User Guide

8 Video and Audio

Issue 01 (2013-03-27)

Huawei Proprietary and Confidential

The icon for the local or remote presentation disappears once the local presentation source is

disconnected from the TE30 or the sharing of the remote presentation stops.

Before a conference starts, you can set the position of the PiP window on the screen. For

details, see Table 4-4.

8.5 Selecting Video Sources

You can specify video input ports for the local video, local presentation, and remote video.

Selecting the Local Video Source

Step 1 Press on the remote control to switch to the local video.

Step 2 Press on the remote control and, in the lower right corner of the screen, select a video

feed as the local video source.

----End

Selecting the Local Presentation Source

Select from the option bar. Then specify a video feed as the local presentation

source.

Selecting the Remote Video Source

During a conference, you can select to view a remote video source.

Step 1 Press on the remote control to switch to the remote video.

Step 2 Press on the remote control and, in the lower right corner of the screen, select a video

feed as the remote video source.

----End

8.6 Hiding the Local Video

During a conference, you can hide the local video if you do not want the video to be seen by

remote sites. After this function is enabled, the local site is displayed as a blue screen at

remote sites.

Background

The TE30 is in a conference.

Procedure

Step 1 Choose Advanced Settings > Utilities > Hide Video (Off). When prompted, confirm that

you want to enable the function to hide the local video.