User's Guide

HUAWEI TE30 Videoconferencing Endpoint
User Guide
8 Video and Audio
Issue 01 (2013-03-27)
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
69

If the packet loss rate is greater than or equal to threshold B, is displayed.
Other Icons
Status icons are displayed on screens if the following condition is met:

You have set the icon to be displayed on screens as follows:
Choose Advanced Settings > Settings > Display > Icon and select the icons to be
displayed on screens.

The function that corresponds to the status icon has been enabled or is available.
8.2 Adjusting Audio Effects
You can adjust the audio effects by modifying the settings for the audio input, sound effect,
and volume.
Background
For details about how to adjust the audio input and volume, see 5.3 Configuring Audio. This
section describes how to adjust the sound effect only.
Procedure
Step 1 Choose Advanced Settings > Settings > Audio > Sound Effect. Set the sound effect
parameters by referring to Table 8-2.
Table 8-2 Sound effect parameters
Parameter
Description
Setting
Ringtone
Specifies the ringtone for incoming calls.
The default value is
Default.
Locally output
sound from
AUDIO IN
Specifies whether to allow the audio input
from the LINE IN port to be heard at the local
site.
This parameter is
deselected by default.
AUDIO IN
remote output
Specifies whether to allow the audio input
from the LINE IN port to be heard at remote
sites.
This parameter is
selected by default.
Bass
Middle
Treble
Adjusts the equalizers by moving the sliders.
Value range: -6 dB to
+6 dB
The default value is
+0dB.
Step 2 Select Save.
----End